METROWORTH CONSULTING

Responsibility

• carry out subsea pipeline FEED activities comprising mechanical design, specification development, riser design, pipeline analysis
• knowledge of, and compliance with, Client's Management Systems
• liaise with pipeline designers and umbilicals/controls engineers
  Show more +24
• knowledge of, and compliance with, client, industry and international specifications and standards
• focusing on safety, reliability and quality
• supervision of Discipline Engineers under own control, and for the technical content and quality of work produced by these discipline personnel
• for oil and gas onshore installations
• direction of Discipline Designer allocated to own area of responsibility and frequent liaison to ensure coordination
• greenfield and brownfield telecom project in Oil and gas project experience is essential
• production of cost-effective engineering solutions that are fit for purpose, safe and add value to both Kenera and the Client
• middle east onshore experience is essential awareness of Saudi Aramco standards
• reviewing technical proposals from EPC contractors
• motivation of discipline personnel allocated to own area of responsibility to do similarly
• evaluating technical proposals and compiling evaluation results
• develop Specification/Technical Evaluation of Telecom systems like LAN-WAN Systems, Fiber Optic Cable Systems, CCTV Systems, Access Control Systems, Public Address General Alarm Systems , PABX, Hotline Systems, Wireless/Microwave/ TMR Radio Systems, Perimeter/Fence Intrusion Detection System, etc
• supporting the project construction manager in project constructibility program
• as delegated by Lead Discipline Engineer - Identification of scopes of work required to undertake a project / job
• estimation of deliverables, manpower and time required to execute the scope of work
• providing construction input to the overall EPC schedule
• hands-on experience in Creating Block Diagram, Schematic Diagram, Cable Schedule, Equipment Schedule, datasheets, Interconnection, and Wiring diagram, Cabinet General Arrangement Diagram, MTO and layout drawings, etc
• assisting in the development of construction costs for the project
• monitoring of competence of engineering personnel under own control and reporting to Lead Discipline Engineer of any shortfall and proposed remedial measures
• input to project plans and schedules
• providing day to day construction support and input to the project
• although not essential, previous ARAMCO work experience is desirable
• surveys, both onshore and offshore, to determine information to allow execution of work scopes
• raising requisitions for purchase of engineered items and services, as directed by the Lead Discipline Engineer

Requirements

• designing process control and automation systems in compliance with industry and customer/client standards
• demonstrate competence in discipline engineering
• must have experience of weight & COG management in the oil and gas industry
  Show more +61
• collaborating with team members in the home office and other execution centers
• must be well organised, proactive and a good communicator
• job Responsibilities
• experience of leading Piping Design and Piping Mechanical team from concept through to FEED
• role and Responsibilities
• required onshore HVAC experience in the petrochemical industry
• sizing and selecting field instruments
• good interpersonal skills with an ability to tailor their approach to deal appropriately with all levels of contact
• provide technical expertise to projects
• developing plant layouts from concept
• assists with design development for DCS, PLC and SCADA-based process control systems for clients and projects
• the work involves utilising industry knowledge and benchmarking tools to compile weight and COG estimates
• previous FEED experience and technical review of ITT documentation is essential for this role
• required - project experience for FEED or detailed design in the middle east area
• developing philosophies, specifications, and datasheets
• an assertive and self-confident person
• lead pre-FEED and FEED projects and ensure the scope is understood by others and monitored
• fully converse with 2D CAD applications including AutoCAD and Microstation
• develops the design of process control and automation systems in compliance with industry standards and customer requirements
• assisting with the design of DCS, PLC, and SCADA-based process control systems
• team player who demonstrates maximum flexibility and remain calm under pressure
• responsible for the overall direction of the piping design activities with a large project or several small projects
• able to use PDMS or E3D
• collaborates with client counterpart to develop control systems concepts, architectures and control platforms as applied to the client project
• occasional travel to support and audit Global Projects and witness weighing is to be expected
• A working knowledge of industry standards for HVAC equipment is required
• collaborating with client counterparts to develop control system concepts, architectures, and platforms
• deadline conscious with strong drive and initiative and ability to work well in time sensitive situations
• facilitate effective Piping Engineering interface with the project team and the client
• significant onshore layout experience
• identifies, qualifies and collaborates with third-party system integrators as necessary to support project and company business objectives
• job success will depend on interpersonal skills and the effective interaction with others
• understanding of the Oil & Gas sector marketplace, market forces
• performing automation-related tasks such as creating I/O lists, instrumentation lists, and specifying instrumentation and control elements
• competent in the application, specification, and requisitioning of DCS, PLC, and SIS systems, with experience in the system’s full life cycles
• capable of producing necessary documents associated with proposals and present concepts to prospective clients
• developing presentations and experience communicating with client team
• performs automation-related job functions as assigned, including, I/O lists, Instrumentation lists and the specification of instrumentation and control element
• supporting risk assessments such as SIL, LOPA, and HAZOP
• preparation of project execution plans, input to project schedules and coordination of the piping team on a FEED project
• experience of working on conceptual, pre-FEED, FEED and/or EPC projects
• supports risk assessments, including SIL, LOPA, and HAZOP
• experienced in reviewing System vendor documentation for compliance with project and process specifications
• preparing budgetary requisitions and bid evaluations
• as Weight Engineer, you will be responsible for weight & COG management for major offshore and onshore projects associated with oil & gas industry working to a defined budget and program
• needs to be able to communicate effectively at all levels, especially in a multi-discipline project environment, with good potential to develop strong leadership skills
• senior construction engineer required to support technical Invitation To Tender submissions from EPC contractors and provide day to day construction support to the project
• capable of representing the piping discipline to the client
• self-motivated and good communication skills to enable effective team working
• assists in developing the safety requirement specification , working knowledge of IEC 61508 & IEC61511
• assisting in the development of safety requirement specifications and having working knowledge of IEC 61508 & IEC61511
• supporting and producing deliverables to meet client and company expectations of quality
• committed to exploring new methods of working and be keen to support KBRs digitalization initiatives
• greenfield Offshore project work experience essential
• experienced in developing philosophies, block drawings, and datasheets for all systems
• instrumentation Engineer experienced in multi-discipline engineering teams on mainly oil & gas industry green field offshore projects. Projects ranging from conceptual studies, FEED, and detailed design to complete installations
• the work will involve liaising with other disciplines at all levels, client and 3rd party contractors and coordinating and working with project team members across global offices to deliver the tasks within allotted timelines and budgets
• preferably degree qualified with a minimum of 7 years related experience or can demonstrate equitable experience gained in a multi discipline environment in a supervisory role
• committed to multi-centre working
• some knowledge of piping stress to ensure consideration during design development
• woodside project experience preferred

Earnings for position engineer

Responsibility

• develop front end piping layout deliverables including plant layouts
• build equipment and route piping as per client standards
• proficient in 2D drafting software packages
  Show more +14
• build on their knowledge of the technical requirements of piping up individual items of equipment
• experience with Smart Plant Instrument Database application
• communicate effectively with other engineering disciplines
• supervision of less experienced designers to achieve project outcomes
• interface with other engineering discipline like Electrical, Piping etc for instrumentation and Telecom inputs
• committed to multi-centre project execution
• adhere to clients engineering standards and procedures as well as provide input to their development and enhancement
• preparation of Instrumentation and Telecommunication engineering deliverables like Block diagrams, Instrument Index, location layouts, hookups, installation drawings, cables schedules, cable routing layouts, Material Takeoff, Bill Of Material, Control Room and Rack Room Layouts etc
• support Lead Engineer on internal as well as external changes
• shall comply to company and project standards, procedures and specifications
• experience of co-ordination with high value Engineering Centre
• 3D modelling experience and experience in extract drawings from 3D Model will be an advantage
• experience in development of Telecom block diagrams
• is responsible for the technical and commercial quality of the work executed within the group and for the supervision of the Draft Persons, Designer reporting to him/her

Requirements

• minimum Higher National Certificate in Plant Process or Mechanical Engineering or equivalent
• essential
• extensive knowledge of Piping Design and Plant Layout during FEED projects
  Show more +8
• GCC experience for Gas Increment FEED project utilising SP3D and Microstation tools
• knowledge of SPEL would be an advantage
• fully converse with 2D CAD applications including Microstation
• fully converse with SmartPlant 3D
• significant onshore layout experience
• good communication skills including ability to present at design reviews
• desirable
• experience using Saudi Aramco Engineering Standards and Procedures

Earnings for position designer

Responsibility

• principal Electrical Engineer with demonstrable experience of designing large industrial power systems for Oil and Gas and Energy transition for Pre-FEED and FEED work
• lead Electrical Engineer with demonstrable experience of leading teams and designing large industrial power systems for Oil and Gas Pre-FEED and FEED work. The work is for onshore oil facilities, OHL, for GCC Pre-FEED and FEED work
• the Principal Electrical Engineer will be able to demonstrate experience of designing large industrial power systems for Oil and Gas, onshore / offshore, Energy transition for Middle east Pre-FEED and FEED work
  Show more +4
• the Principal Electrical Engineer will be able to demonstrate experience of designing large industrial power systems for Oil and Gas, onshore / offshore, Energy transition for Middle East Pre-FEED and FEED work
• candidates must have demonstrable experience of designing large industrial power systems for Oil and Gas, onshore and offshore experience for Caspian projects - PreFEED / FEED
• principal Electrical Engineer with demonstrable experience of designing large industrial power systems for offshore installations / FPSOs for Pre-FEED / FEED work
• lead Electrical Engineer with demonstrable experience of leading teams and designing large industrial power systems for Oil and Gas Pre-FEED and FEED work

Requirements

• a) conceptual designs for onshore and / or offshore project
• b) sizing and selection of high voltage equipment, Large Frequency convertors, AC/ DC UPS systems etc
• c) Development of philosophies
  Show more +43
• d) Power Systems Studies
• a) sizing and selection of high voltage equipment, Large Frequency converters, AC/ DC UPS systems etc
• a) Leading discipline teams in home office and other execution centres with a focus on technical review of deliverables
• a) Adequacy check of Electrical infrastructure
• a) sizing and selection of high voltage equipment, Large Frequency convertors, AC/ DC UPS systems etc
• previous experience would be from offshore platforms or FPSOs in Australia, North Sea, West Africa or similar
• sizing and selection of high voltage equipment, Large Frequency convertors, AC/ DC UPS systems etc
• transformer Requisitioning
• b) Development of specifications and philosophies
• b) design of onshore to offshore power supply system including subsea cabling
• design of onshore to offshore power supply system including subsea cabling
• design of onshore / offshore power supply systems up to 110kV
• e) Brownfield tie-ins at existing plants
• there will be a focus within the design on cost, schedule, safety, reliability, and quality at all stages of the projects
• c) Power Systems Studies
• c) Development of philosophies, specifications and datasheets
• c) Development of specifications and philosophies
• development of specifications and philosophies
• this will require 2/3 days per week in the office
• d) Australian experience
• d) Preparation of budgetary requisitions and bid evaluation
• power Systems Studies
• d) Brownfield tie-ins for Greenfield plants"
• e) Power Systems Studies
• e) Brownfield and Greenfield
• brownfield and Greenfield
• power Management Systems
• provides electrical engineering expertise to hazard identification and risk assessment processes
• f) Brownfield tie-ins for power supply, including utility tie ins
• hybrid working - will need to be in the office 3 to 4 days per week
• as the lead engineer for the FPSO electrical engineering team, you will be responsible for the delivery of the electrical design for the Topsides and overall design intergity for the FPSO
• FPSO FEED is looking for a Senior Electrical Operations Engineer to support the development of the deliverables considering the proposed operation of the facilities
• lead Electrical Engineer with demonstrable experience of leading teams and designing large industrial power systems for Oil and Gas or Energy transition for Pre-FEED and FEED work
• any experience in design of upstream Heavy Oil facilities, GTG based Co generation, Steam generation, Water treatment plant, Once through Steam generation etc will be advantageous
• the role is for front end engineering design leading to the EPC / detailed design execution involving, the procurement of all equipment and detailed drawings for the construction and commissioning of an entire facility
• develops and updates the technical content of Equipment Strategies based on equipment performance feedback and performs periodic review of CMMS effectiveness
• b) Sizing and selection of power generation and distribution system including high voltage equipment, low voltage equipment, AC/ DC UPS systems etc
• you would provide electrical engineering expertise gained in operating facilities to bring lessons back into the design with a focus on operation of the power distribution system and power generation
• you will be leading a team of engineers and designers to deliver the project as part of a multi-disciplinary team. You will be responsible for liaising with clients and contractors as required
• you would bring knowledge of regulatory compliance, classification society rules, best technical practice/specifications, lessons learned and you would provide support for design reviews, procurement and life cycle operability of the facility including hazardous area equipment classification management systems
• performs reliability analysis for electrical equipment using surveillance, maintenance and condition monitoring data, and trends performance metrics
• if this is of interest to you or to anyone you know, please send me your updated CV along with your availability
• you would provide electrical engineering expertise to other teams by performing and reviewing complex, or non-routine electrical engineering calculations and analyses

Responsibility

• the successful candidate will have prior experience in management of engineering teams working in brownfield and/or onshore gas processing projects
• design management
• experience in delivery of pre FEED and FEED scopes
  Show more +22
• ensure compliance with corporate policies and procedures
• ensure compliance with Client corporate policies and procedures
• experience of Saudi Aramco project delivery
• prepare, maintain and communicate an engineering resource plan, identifying required type and timing of resources
• experience in complex project delivery with strong experience in upstream disciplines
• prepare and maintain an engineering execution plan, describing how the engineering will be executed
• oversee the accurately measurement, monitoring and reporting of engineering progress
• participate in preparing and updating the engineering portion of the project schedule
• recognize and report changes to the scope of work, forecast cost, or forecast schedule
• design basis
• minimum 25+ years’ experience in Oil and Gas Industry
• provision of quantity trends on detailed design projects
• minimum 15+ years’ experience in engineering management delivering engineering scopes across multiple offices
• establish and communicate applicable regulatory requirements to engineering personnel and ensure compliance with those regulations
• design Method
• monitor the quality of engineering specifications which define the work to be completed by others
• monitor the quality of engineering product
• obtain, document and communicate accurate site data for the proposed facility location
• prepare, issue, and maintain a project design basis document. Changes to the document after issue should be considered changes to the scope of work
• initiate and own the preparation, issuance and update of a major equipment list throughout the engineering phase of the project
• establish and communicate applicable regulatory requirements to engineering personnel, and ensure compliance with those regulations
• train, develop & mentor the team

Requirements

• skills typically acquired through the completion of an undergraduate degree in Engineering and possession of a Professional Engineering qualification
• proficient oral and written communications skills. Collaborates well in a team environment
• senior professional with strong personal drive and credibility with both internal and external stakeholders
  Show more +9
• track record of project delivery in Europe, AGT , Middle East or Africa
• demonstratable flexibility and ability to adapt to changing project-related priorities and deliver high quality, accurate work within required deadlines
• track record of project delivery in Europe, Australia , Middle East or Africa
• ability to works things through with clients to resolve issues, including conflicting demands, sensitive situations, and conflicts with other groups
• abides by the Code of Business Conduct and business ethics
• awareness of environmental and sustainability issues
• abides by the Clients Code of Business Conduct and business ethics
• member of IET or equivalent
• excellent awareness of environmental and sustainability issues

Responsibility

• assists with design development for DCS, PLC, and SCADA-based process control systems for clients and projects
• evaluates and selects an instrument, control valve, and analyzer solutions
• reviews vendor documentation for compliance with project and process specifications
  Show more +11
• develops the design of process control and automation systems in compliance with industry standards and customer requirements
• collaborates with client counterpart to develop control systems concepts, architectures, and control platforms as applied to the client project
• ensures the quality, accuracy, consistency, timeliness, and completeness of overall work to our client I&C engineering principles; compliance with established standards, procedures, codes, and ordinances; adherence to project schedules; and provides adequate training, technical and administrative guidance, and instruction to personnel within the discipline
• prepares MTO based on experience and scope of the project
• develops the preliminary and final stage I&C, and design deliverables including contributing to P&IDs Instrument List, Instrument Specifications, and Instrument Data Sheets
• works with end users and Original Equipment Manufacturers to coordinate the application of automation products
• performs automation-related job functions as assigned, including, I/O lists
• instrumentation lists, and the specification of instrumentation and control elements
• awareness of Norwegian standards preferred
• attendance at meetings called by Project Manager / Engineer, e.g. progress meeting, as delegated by the Lead Discipline Engineer
• technical input to procurement and QA activities e.g. Technical Bid Evaluation, Criticality Rating

Requirements

• professional qualifications and member of discipline professional institution
• proven experience in discipline engineering role with an Oilfield Operator, Drilling Contractor or Service Company
• knowledge of, and compliance with, client, industry and international specifications and standards
  Show more +25
• supervision of Discipline Engineers under own control, and for the technical content and quality of work produced by these
• demonstrate competence in discipline engineering
• discipline personnel
• must be well organised, proactive and a good communicator
• degree in Structural Engineering Design
• good interpersonal skills with an ability to tailor their approach to deal appropriately with all levels of contact
• minimum experience of 12 years having excellent technical and practical engineering skills and able to consistently deliver on quality and schedule
• proficient user of SESAM GENIE and SESAM suite of software a prerequisite
• direction of Discipline Designer allocated to own area of responsibility and frequent liaison to ensure coordination
• an assertive and self-confident person
• proficiency to perform non-linear FEA using ABAQUS and USFOS is desirable
• production of cost effective engineering solutions that are fit for purpose, safe and add value to the Client
• team player who demonstrates maximum flexibility and remain calm under pressure
• deadline conscious with strong drive and initiative and ability to work well in time sensitive situations
• motivation of discipline personnel allocated to own area of responsibility to do similarly
• understanding of the Oil & Gas sector marketplace, market forces
• ability to work efficiently and effectively when managing multiple tasks
• as delegated by Lead Discipline Engineer - Identification of scopes of work required to undertake a project / job
• ability to work both independently and in a multi-disciplinary team environment
• estimation of deliverables, manpower and time required to execute the scope of work
• ability to work in an office based role
• monitoring of competence of engineering personnel under own control, and reporting to Lead Discipline Engineer of any shortfall and proposed remedial measures
• input to project plans and schedules
• originating engineering documentation for allocated workscopes, e.g. calculations, design reports and specifications, and
• checking similar documentation and workpacks created by others