TE CONNECTIVITY

Responsibility

• production Operator - Witham based
• TE Connectivity's Manufacturing/Production Teams transform raw materials into finished goods and ensure component flow
• production Operator Wire & Cable
  Show more +58
• monday to Friday - 10pm - 6am
• permanent Contract - Full-time
• to prepare and complete all documentation accurately, legibly and in a timely manner
• hours of Work
• to report any deviations to supervision promptly and to assist in resolving non-compliances where necessary
• 7.30 - 16.35 Monday to Thursday & 7.30 - 13.10 on Friday
• weekend Day shift Role, 6am-6pm Friday, Sat & Sunday - 36 hours in total - Permanent Role
• flexible hours for overtime
• key Responsibilities
• job Responsibilities
• to work within the team performing the various stages of production as defined by the Tyco Electronics Operating Advantage , Quality, Safety, General Standards and Company Procedures
• be aware of EH&S issues i.e COSHH & Risk Assessments
• expansion of silicone rubber over a plastic hold out
• kitting Assembly Operator II
• FTC 12 months
• implement a customer focussed operational culture
• being aware of EH&S issues i.e. COSHH & Risk assessments, working as part of a team with the Utilities Supervisor
• adhere to working practices and procedures
• to monitor & control quality as well as having a good attention to detail
• soldering and wiring of cable harness assemblies and connectors
• this role is part of the Kitting Production Area, this role will involved Assembling and Packing parts of low and Medium Voltage kits for the Utilities Business and is of a repetitive nature
• they perform changeovers and setups according to production schedule, perform quality checks according to established processes and document the results as required by our quality procedures
• adhering to working practices & procedures
• attracts 33% shift allowance
• monitor & Control Quality
• every team member is responsible for maintaining housekeeping and organization of the work area as well as following TE Connectivity's EH&S policies and procedures
• moulding of cable assemblies and connectors
• to monitor & control quality
• 39 Hours per week
• keep up to date with day to day operations new/existing products and complete work on time in line with process times
• this role is part of the cold applied area. The role will involve producing cold applied products for the Utilities business and is of a repetitive/physical nature
• job Scope - To contribute to the manufacture of connectors and cable harnesses in accordance with the company Health & Safety and Quality standards
• keeping up to date with day to day operations/new/existing products & complete work on time in line with process times
• 7.30am - 16.35pm Monday - Thursday, 7.30am - 13.10pm Friday
• have an understanding of areas documentation
• to ensure that all activities are carried out in accordance with the appropriate company procedures
• requires an understanding of areas documentation
• key Tasks
• shift: Week1 - Mon-Thurs: 6.00am-2.00pm Fri: 6.00am-12.00 mid-day Week 2 -Mon-Thurs: 2.00pm-10.00pm Fri: 12.00 mid-day -6.00pm attracts 20% shift allowance
• key Requirements
• assembling and packing parts of low and medium voltage kits for the Utilities area
• to observe and operate in accordance with Heath and Safety regulations as laid down in company procedures and Government legislation to ensure the safety and wellbeing of employees, workers and visitors
• additional Responsibilities
• as a Production Operator, you will contribute to the manufacture of Wire & Cable products in accordance with the company Quality standards as well as Health & Safety guidelines
• ensure that all customer targets are achieved
• ensure local area metrics are achieved
• act in line with EH&S processes and policies including associated risk assessments and COSHH guidelines
• achieve the required standard times, to achieve departmental efficiency target
• this position is based in the Kitting Production Area, but there could be a requirement when workload changes that the individual could go into other production areas in the business
• to carry out any other duties as requested by the Supervisor
• carry out any other duties as requested by the Utilities Supervisor
• shift work requirement
• overview: This role is part of the cold applied area. The role will involve producing cold applied products for the Utilities business and is of a repetitive/physical nature
• night Shift: Mon - Thurs 10pm - 6am, Fri 6pm - 12am
• monitor and quality control
• work within the team performing the various stages of production as defined by the Tyco Electronics Operating Advantage , Quality, Safety, Company Procedures and Industry Standards
• what you will bring
• contribute to the continuous improvement of processes, procedures and quality within the department

Requirements

• the ability to read and follow work instructions/ methods, manufacturing specifications and quality standards
• to participate in internal / external training programs which are relevant to the role and your personal development plan
• to have an awareness and accountability of sources of waste that impacts the business
  Show more +30
• to Work in a safe manner and follow all health and safety guidelines
• experience in the field of wire harness building
• knowledge of quality control procedures, techniques and test methods required in the manufacture of military standard wiring harnesses
• prior Kitting or Connectors experience not necessary but preferred
• training will be Provided
• prior kitting or connectors experience not required but preferred
• the ability to read and follow work instructions/methods, manufacturing specifications and quality standards
• good general education required with numeracy and perception essential
• education - Good general education required with numeracy and perception essential
• have an awareness and accountability of sources of waste that impacts the business
• A good knowledge of TE Connectivity products, their performance, features, benefits and limitations
• training will be provided
• prior experience not essential
• an ability to conduct effective handovers to maintain workflow
• previous experience of cable preparation, wiring stripping and laying
• experience of working with Quality Management and Quality Productivity Systems
• experience of wire termination to solder and crimp contacts, screen and wire termination using SolderSleeve™ devices and connector assembly
• good numeracy and literacy skills
• experience of final harness assembly braid, tubing and moulded parts adaptors
• A logical and methodical approach to tasks
• soldering
• A flexible approach and a willingness to learn new skills
• work as part of a team performing the various stages of wire production, in line with a manufacturing schedule
• moulding
• prepare and complete all documentation accurately, legibly and in a timely manner
• working as part of a team
• contribute to the continuous improvement of processes, procedures, and quality
• basic IT skills
• working in a Production environment with deadlines
• ability to work well as part of a team

Earnings for position production operator

Responsibility

• production Operator - Witham based
• TE Connectivity's Manufacturing/Production Teams transform raw materials into finished goods and ensure component flow
• production Operator Wire & Cable
  Show more +49
• monday to Friday - 10pm - 6am
• permanent Contract - Full-time
• hours of Work
• 7.30 - 16.35 Monday to Thursday & 7.30 - 13.10 on Friday
• weekend Day shift Role, 6am-6pm Friday, Sat & Sunday - 36 hours in total - Permanent Role
• safe and appropriate use of hand-tools, jigs, fixtures and automated machines
• flexible hours for overtime
• key Responsibilities
• preparation and assembly of component substances, parts and materials
• job Responsibilities
• to acquire the appropriate skills to become flexible so as to multi-task in any production department
• be aware of EH&S issues i.e COSHH & Risk Assessments
• expansion of silicone rubber over a plastic hold out
• kitting Assembly Operator II
• FTC 12 months
• implement a customer focussed operational culture
• work to the appropriate standard, quality and speed ensuring customer satisfaction in full
• to work to a manufacturing schedule and to notify supervision of any issues that may affect the completion of the schedule
• being aware of EH&S issues i.e. COSHH & Risk assessments, working as part of a team with the Utilities Supervisor
• adhere to working practices and procedures
• to monitor & control quality as well as having a good attention to detail
• soldering and wiring of cable harness assemblies and connectors
• take responsibility for your own inspection and quality
• this role is part of the Kitting Production Area, this role will involved Assembling and Packing parts of low and Medium Voltage kits for the Utilities Business and is of a repetitive nature
• they perform changeovers and setups according to production schedule, perform quality checks according to established processes and document the results as required by our quality procedures
• to prepare and complete all documentation accurately, legibly and in a timely manner
• adhering to working practices & procedures
• attracts 33% shift allowance
• any other duties deemed appropriate or necessary by management
• monitor & Control Quality
• every team member is responsible for maintaining housekeeping and organization of the work area as well as following TE Connectivity's EH&S policies and procedures
• moulding of cable assemblies and connectors
• to report any deviations to supervision promptly and to assist in resolving non-compliances where necessary
• to monitor & control quality
• 39 Hours per week
• keep up to date with day to day operations new/existing products and complete work on time in line with process times
• this role is part of the cold applied area. The role will involve producing cold applied products for the Utilities business and is of a repetitive/physical nature
• job Scope - To contribute to the manufacture of connectors and cable harnesses in accordance with the company Health & Safety and Quality standards
• to contribute to the continuous improvement of processes, procedures and quality within the department
• keeping up to date with day to day operations/new/existing products & complete work on time in line with process times
• 7.30am - 16.35pm Monday - Thursday, 7.30am - 13.10pm Friday
• have an understanding of areas documentation
• to ensure that all activities are carried out in accordance with the appropriate company procedures
• to comply with training procedures and keep abreast of updates to General Standards
• requires an understanding of areas documentation
• key Tasks
• shift: Week1 - Mon-Thurs: 6.00am-2.00pm Fri: 6.00am-12.00 mid-day Week 2 -Mon-Thurs: 2.00pm-10.00pm Fri: 12.00 mid-day -6.00pm attracts 20% shift allowance
• key Requirements
• assembling and packing parts of low and medium voltage kits for the Utilities area

Requirements

• experience in the field of wire harness building
• knowledge of quality control procedures, techniques and test methods required in the manufacture of military standard wiring harnesses
• prior experience not necessary but preferred
  Show more +29
• prior Kitting or Connectors experience not necessary but preferred
• training will be Provided
• prior kitting or connectors experience not required but preferred
• the ability to read and follow work instructions/methods, manufacturing specifications and quality standards
• good general education required with numeracy and perception essential
• education - Good general education required with numeracy and perception essential
• previous experience working in a similar manufacturing / production role would be beneficial
• A good knowledge of TE Connectivity products, their performance, features, benefits and limitations
• training will be provided
• prior experience not essential
• an ability to conduct effective handovers to maintain workflow
• previous experience of cable preparation, wiring stripping and laying
• experience of working with Quality Management and Quality Productivity Systems
• good communication skills
• experience of wire termination to solder and crimp contacts, screen and wire termination using SolderSleeve™ devices and connector assembly
• good numeracy and literacy skills
• attention to detail
• experience of final harness assembly braid, tubing and moulded parts adaptors
• A logical and methodical approach to tasks
• soldering
• complete work on time in line with process times.- Maintain accurate logs and records
• reliability
• A flexible approach and a willingness to learn new skills
• work as part of a team performing the various stages of wire production, in line with a manufacturing schedule
• moulding
• being aware of EH&S issues i.e. COSHH & Risk assessments
• prepare and complete all documentation accurately, legibly and in a timely manner
• working as part of a team
• contribute to the continuous improvement of processes, procedures, and quality

Responsibility

• support the achievement of daily business goals and progress long term technical and cost reduction projects
• main responsibility is to complete sustain activities to support production within the assembly departments to their KPI’s
• job Responsibilities
  Show more +42
• working with Engineering team on designing, testing and implementation of new manufacturing processes, new equipment, procedures, and systems
• provide hands on day to day manufacturing support
• TE Connectivity's Manufacturing Engineering Teams are process leaders for stamping, molding or assembly related topics, ensuring the processes are running at optimum levels for quality and output
• supporting, maintaining, and improving current production processes
• analysis and reporting on production processes, methods, schedules, downtime, cycle times, availability of machines and waste management
• deliver ongoing improvements to processes, procedures and products, with a view to improving Site Productivity, Quality and Scrap Reduction
• working with Engineering team on implementing new manufacturing processes and systems
• the main target summary is to carry out a wide range of assignments to improve the efficiency, quality and repeatability of the assembly production areas. Create supporting documentation and provide training to ensure successful implementation
• they are experts in mold tooling, die tooling, machining, and assembly techniques, possessing extensive knowledge of the associated manufacturing processes which may include the optimization and standardization of stamping / molding / assembly or other processes within the manufacturing environment
• researching and implementing opportunities to make processes more efficient to increase productivity and enable savings
• collate and analyse data to provide solutions to Production and Technical problems
• manufacturing Engineering Teams enable the TE business unit plants to reach TE Operating Advantage requirements, roll out Centers of Excellence , Best Demonstrated Practices and advise plants on tool and machine duplications / corrections / improvements
• analysis of exiting production processes, downtime, cycle times & machine trends to support production
• gather and analyse data to determine root cause of the process failure and system requirements
• ensure that all production paperwork, machine recipes and specification are in place and up to date
• looking for opportunities to make processes more efficient to increase productivity and enable savings
• to assist with the manufacture of NPI jobs when required whilst providing technical support in trouble-shooting production problems. Providing timely and efficient routings for the manufacturing areas
• they design and develop manufacturing process and automation platforms and apply them for the realization of new product developments as well as optimization of existing products already in production
• ability to read technical instructions, engineering manuals and other production and machine related documents
• ensure product costings, standards and documentation is accurate
• the Teams also support Product Development in the selection and optimization of tools for piece part production and the selection of the most suitable manufacturing concepts relative to planned manufacturing quantities, quality requirements and manufacturing location
• analyse root cause of the process failures and supporting Maintenance team with more complex machine breakdowns
• to work with the NPI team to deliver new to market products that are right first time and use best practice
• ability to use charts to illustrate workflow, routings, floor layouts, material handling, and machine utilisation
• ensure all process changes are controlled and appropriately documented according to business procedures
• they act as interface between engineering and production to ensure manufacturability of new designs and smooth production ramp up as well as support the research & development teams to produce sample manufacturing equipment, product samples and prototypes
• define the best manufacturing method for the process and document standard work and drawings
• assist the site in New Product Introduction projects leading to successful product launch and safe and efficient production preparation
• ensure customer complaints are answered and resolved with robust solutions within business time frames
• keep well-informed of technical developments and review manufacturing methods
• assist with New Product Introduction projects ensuring successful product launch and production preparation
• perform PFMEA
• supporting Manufacturing trials through the plant for Sustaining or new Product Development
• carry out any other reasonable tasks as directed by the business from time to time
• review and set up optimized product flow through standard work
• ensure all activities are carried out safely, and any hazards are correctly identified and reported in an expedient timeframe
• use technical expertise to define, document and provide training for current best practice, ensuring cost effective, repeatable and high quality practices are used for both existing production and New Product Introductions
• support our team to make production processes more safe, robust, and delivering good quality product
• enable the smooth integration of new products into production by documenting tooling, work holding and gauging requirements in routings and various types of specifications
• work inline with the company Fundamental Rules & lead the Assembly areas by example ensuring adherance to these rules
• identify cost reduction and quality improvement initiatives
• observe and comply with Health and Safety regulations as laid down in company procedures and Government legislation

Requirements

• HNC or Degree in Mechanical or production Engineering
• the ability to work in fast paced environment delivering tasks to agreed project timeline
• experience working within a Compounding Plant
  Show more +47
• practical knowledge of assembly techniques and a background in manufacturing engineering
• working knowledge of how to set-up and execute Design of Experiments is preferred
• working towards or willingness to achieve Engineering Qualification
• practical knowledge of assembly, with a focus on Fibre Optics
• the ability to programme, run and troubleshoot production problems on automated and semi-automated equipment as well as manual processes
• good problem-solving skills
• candidate must be self-sufficient from an Assembly Process Design / Development standpoint but capable of reaching collaborative team solutions
• attention to detail and strong written and verbal communication skills
• experience in ensuring quality with flow diagrams, PFMEA’s, control plans and quality inspection plans
• computer literate using Microsoft software
• experience with SAP and Minitab
• knowledge of standard manufacturing techniques
• ability to perform capability studies on manufacturing processes and equipment
• practical, hands-on and action orientated
• knowledge of industry tools for troubleshooting such as 5 why’s, fishbone diagrams and 8D reports
• six Sigma Green Belt or Black Belt or equivalent such as Red X
• previous experience maintaining an MRP system
• awareness of LEAN Manufacturing principles
• knowledge of PFMEA process is preferred
• enthusiastic, driven and self-motivated with a positive attitude
• ability to work on own initiative and deliver results in fast paced environment
• tool and fixture design experience with SolidWorks, Creo or other design package
• experience ensuring quality and lessons learned with flow diagrams, PFMEA’s, control plans and quality inspection plans
• strict attention to detail
• working knowledge of six sigma and lean manufacturing tools is highly preferred
• flexibility to work on a number or projects and ability to prioritise
• project management skills when delivering projects
• identifies and recommends new or improved manufacturing processes and technical developments
• A critical thinker dedicated to solving root cause analysis problems and continuous improvement on the job
• strong verbal and written communication skills are required
• use of Microsoft and IT system
• six Sigma Green Belt or Black Belt or equivalent
• experience with digital machine connectivity
• mechanical or Manufacturing Engineering Degree or a combined HNC / HND technical degree is required. Relevant Connector or Small Component Assembly experience is preferred
• can utilize computer literacy capabilities to assist with tasks
• competency with CAD software for basic fixture design is required
• six Sigma or Strong Analytical skills advantageous
• continuous improvement involving Material Replenishment and Flow and Cycle Wheels or Heijunka Boards
• the ability to work with diverse teams, building strong working relationships with different groups of stakeholders
• competencies
• basic mechanical assembly, use of hand tools and hand measuring equipment
• use & create a range of manufacturing documents & tools such as DFM, Process Flows, Value Stream Maps, Control Plans
• run studies and validations on the line as needed
• must have good time management skills to work on numerous projects simultaneously
• about TE Connectivity
• drive and passion to deliver results in a fast-paced environment
• ensure processes and procedures follow regulations

Responsibility

• ability to perform fast set-ups / change overs essential
• capable of taking drawing to part
• excellent attention to detail
  Show more +18
• good understanding of Lean Manufacturing
• quality conscience
• first off inspection
• TE Connectivity's CNC Machinists prepare detailed numerical control programs for use in production on numerical controlled machinery; they run the EDM, including programming, setup and operation
• programme, set and operate CNC 3 to 4 Machines, inspecting your own work and recording the results to ensure the required quality is maintained
• every team member is responsible for maintaining housekeeping and organization of the work area as well as following TE Connectivity's EH&S policies and procedures
• work effectively and resolve issues within a team environment
• complete accurately all necessary material movement paperwork
• programme, set and operate CNC 3 to 4 Axis Milling or Turning Machines, inspecting your own work and recording the results to ensure the required quality is maintained
• perform any additional operations necessary that are required to produce finished components
• location: Hastings
• title: CNC Machinist
• to set and operate manual machines as necessary
• shift Pattern: Swing Shift or Night Shifts available
• involvement in continuous improvement activities / Lean processes
• adhere to company procedure at all times
• to carry out any other reasonable tasks as may be requested from time to time by the business within Production or elsewhere as may be required
• supervision and other members of the production departments as required

Requirements

• A good basic standard of education is required with an engineering bias
• operate a range of 3, 4, and 5 axis CNC machine tools, ensuring that machine down time is minimised
• experience of CNC machine tools setting, operating, engineering
  Show more +27
• verify programs and settings using a range of measuring equipment on first articles and apply appropriate adjustments and program modifications
• the ability to follow standard works instructions is essential
• ensure component compliance in accordance with engineering drawings and quality procedures using a range of inspection equipment
• excellent communication skills
• record daily operations on machine tools and provide operational equipment effectiveness results daily
• time served apprentice with C&G/NVQ or equivalent in mechanical engineering discipline
• ensure compliance with all TE policies and procedures, EHS and safety first together with delivering exception ECE
• capable of working on own initiative
• contribute to continuous improvement activities within the department. Improving processes and applying tools and methods from the TEOA site plan
• experience working on alternating early/late shifts with minimal supervision
• driving and encouraging the values and key behaviours in all actions
• experience programming, setting and operating 3, 4 and 5 axis CNC machine tools
• highest level of accuracy/attention to detail, to ensure standards of work are exemplary with minimal defect
• maintain and improve time standards
• set-up a range of 3, 4, and 5 axis CNC machine tools by installing and adjusting work holding devices, tooling, spindle liners and bar feeders
• experience of Fanuc and Mazatrol machine tools
• organized and self-motivated to work with minimal supervision
• ensure that daily maintenance is carried out as required
• ability to interpret engineering drawings
• demonstrate initiative, flexibility and willingness to take on additional tasks and responsibility in an efficient manner
• maintain a high level of housekeeping
• experience using a range of measurement equipment
• excellent communication at all levels both internally within the business and with suppliers / customers
• observe health and safety regulations as laid down in company procedures and government legislation
• CNC Machining: 2 years
• fully flexible with tasks and the ability to multi-skill
• to support with any other ad-hoc tasks where required

Earnings for position cnc machinist

Responsibility

• representative for the quality management system
• ensure awareness of compliance to regulatory certifications, TE Global QMS / 1AD&M and Customer requirements
• to carry out inspections to company procedures and BS308 drawings
  Show more +56
• support quality function and deliverables across multiple project teams located in multiple regions
• the Senior Quality Engineer shall take the lead and oversee all aspects of the AD&M quality system, ensuring regulatory compliance is met
• ensure that Customer quality queries are dealt with promptly, efficiently and professionally
• managing the internal audit programme ensuring effective close out of any Non Conformances and Opportunities for Improvement
• evaluation of customer quality requirements
• working with critical processes and functions within the AD&M sites whilst focusing on continuous improvement initiatives to drive business excellence and zero-defect culture
• to maintain quality documentation in a neat and methodical manner
• you will be liaising with auditing organisations, notify bodies and regulatory authorities where necessary, in addition to supporting and carrying out the internal audit process within AD&M business unit
• support the roll out of global procedures to enable standardisation of process and standards across TE AD&M
• champion in driving the Voice of the Customer and Extraordinary Customer Experience initiatives back into operations
• to conduct 8D defect investigations and present written preventative and corrective actions
• collating and reviewing the quality management system and compliance documentation
• act as Value Stream lead for Notice of Escape , escalated or high impact customer events and formal customer improvement programs
• as part of the role, you shall be responsible for rolling out global procedures, carrying out training along with implementing procedures where gaps are identified and report performance measures for quality improvements and compliance as well as providing knowledge and support to the company to enable operation of manufacture within regulatory guidelines and procedures
• to review the quality/effectiveness of 8D and corrective
• facilitate and lead Project Design Reviews to ensure LEANPD Development Execution
• to review the quality/effectiveness of 8D and Corrective
• assess and deliver on customer specific quality requirements
• to conduct audits of manufacturing and control systems
• complete project audit of all key deliverables at each gate process and final G6 sign off
• to assist in other quality department activities are required
• lead and direct Product and Manufacturing Engineers and Technicians in the resolution of issues
• manage all 3rd party audits and certifications including follow-up to closure of all related observations, improvements, major and minor non-conformance corrective and preventive action
• regularly report on quality metrics within the organisation to management
• to observe health and safety regulations as laid down in company procedures and government legislation
• to assist in other Quality Department activities as required
• negotiate with team, deviations and concessions with the customer where required and provide documentation to allow sign-off
• working with suppliers to provide digital documentation in the form of a digital PPAP
• to carry out any other reasonable tasks as may be requested from time to time
• to observe Health and Safety regulations as laid down in company procedures and Government legislation
• develop and apply workmanship standards in the inspection of components and assemblies to assess acceptability
• interface with customers, internal manufacturing sites and suppliers as required to address and resolve issues as they arise. travel will be required between Hastings and Swindon TE sites, suppliers, and customers
• liaising with the senior quality engineer and quality manager and other staff members as required
• coordination with other core project functions by providing input for project analysis, feasibility studies, design reviews, as well providing quality APQP deliverables according to Lean PD process
• read engineering drawings interpreting geometric tolerancing and develop the corresponding quality inspection plans for components and assemblies
• liaise with appropriate departments, ensuring deadlines are met
• drive of COPQ
• carry out any other reasonable request by a member of the management team
• 10. To carry out any other reasonable tasks as may be requested from time to time
• liaising with customer/supplier reps
• timely 8D release to customer via TE Complaints Handing System
• support with the maintenance of procedures and work instructions for processes ensuring that the agreed practice is reflected accurately in the Quality Management System
• ensure the applicability & accuracy of current quality policies, procedures, and objectives
• ensure all critical characteristics are identified on drawings and flow through all quality control documentation
• evaluation of quality related deviations during the APQP process, including escalation, definition, implementation, and execution of corrective actions
• conduct quality assurance reviews with operational business management / supply chain management to review ongoing action planning for improvement
• support external 3rd party Certification Body audits and internal audit program ensuring effective close out of any Non-Conformances and Opportunities for Improvement
• to liaise with the other departments to ensure the corrective actions and/or reworks are undertaken, and that actions and/or reports are produced in a timely manner
• promote a high standard of awareness and understanding at site level of all appropriate policies, procedures with Implementation of training programmes associated to quality management system awareness. i.e new start inductions
• ensure adherence to site CVP plan, such that required products are tested to schedule for compliance & tracker is maintained
• assess project specific gaging requirements and work with relevant suppliers to have gages designed, built, and calibrated
• to liaise with the other departments to ensure that corrective actions and/or reworks are undertaken, and that actions and/or reports are produced in a timely manner
• communicate customer requirements within the TE plants/functions to ensure awareness and compliance by providing training, support and organise regular reviews with Swindon site
• reporting of relevant site required Key Quality KPIs on requested frequency basis
• deliver quality assurance training as and when requested
• read and interpret quality specifications and requirements

Requirements

• bachelor's Degree in engineering, manufacture, supply chain or business
• experience in computer systems is essential
• experience in using computer systems is essential
  Show more +29
• aluminium Extrusion / anodising or harnessing or moulding knowledge advantageous
• 5 years experience in a Quality Management Role
• must be familiar with mechanical measurement techniques and be able to use electrical and mechanical measuring equipment
• technical by nature with a practical hands-on approach, with ability to read many types of technical drawings and specifications
• exposure to working in a manufacturing environment
• must be capable of reading BS308 drawings
• experience of quality planning and implementation of quality tools
• good knowledge of change control
• good general education to GCSE level
• problem solving skills using 8D methods
• experience working and developing strong relationships with customers and suppliers
• ONC or C & G in mechanical engineering or similar technical qualifications
• ONC or C & G in Mechanical Engineering or similar technical qualifications
• onboarding & Orientation
• strong knowledge of ISO9001 or AS9100 or IATF16949 in process compliance and with experience in conducting quality system audits
• proven six sigma and lean experience
• professional Development Workshops
• product/process validation through known approval systems/processes
• networking Opportunities
• strong knowledge of ISO9001 / AS9100 & IATF16949
• ideally Degree or HNC in either Industrial, Material Science, Materials, Mechanical, Electrical Engineering or Quality Assurance and/or minimum 5 years’ experience at a manufacturing plant environment in a Quality or Engineering role gained in an aerospace, military or automotive environment
• operations Experience
• strong knowledge and practical experience of quality tools including but not limited to 8D, FMEA, 5Y, FAI’s, PPAP & APQP
• executive Exposure
• experience in complying with customer, statutory and regulatory requirements in a manufacturing environment
• strong verbal and written communication skills
• competencies
• proficient using MS Office
• strong team spirit, ability to influence and drive cross functional teamwork, ability to work well with internal and external customers, and with other cultures