HUNTING ENERGY SERVICES

Responsibility

• carrying out general labouring duties as required and assisting day to day Operations with the Assembly & Test area
• ensuring that all daily and weekly checks are performed on all equipment as per procedures
• painting of all Hunting and customer owned equipment via an airless spray system
  Show more +42
• assisting in the disassembly, cleaning and preparing pressure control equipment in A&T
• ensuring that equipment and chemicals are used in the directed manner and are stored correctly at the end of the shift
• cleaning and preparing of equipment prior to spraying
• water blasting of company and customer owned PCE
• signing off route cards to indicate an operation has been completed and inspected
• power washing / solvent washing of used equipment
• assisting with maintenance work to facilities, plant and equipment within workshop floor or yard
• moving tubulars inside workshop with overhead crane in a safe manner
• masking of all equipment prior to spraying
• ensuring all daily and weekly checks are performed on equipment as per company procedures
• ensuring the airless system is set up safely
• ensuring all equipment and chemicals are used and stored in a safe and controlled manner
• in addition, any methods or procedures identified that can improve quality and efficiency should be reported to the Supervisor
• maintenance of paint system guns and pumps
• signing off route cards to indicate an operation has been completed
• ensuring good housekeeping of the paint bay area
• moving material/components with overhead cranes in a safe and controlled manner
• wearing correct PPE at all times
• maintaining sufficient paint stock levels, informing supervisor of paint to be ordered
• recording on/off working hours accurately and reporting any failed bookings and clockings immediately to the Supervisor
• ensuring that the internal and external surfaces of all components are free of contaminants when an operation is complete
• moving goods around the workshop and yard via a forklift and electric pallet truck
• ensuring Swarf bins are emptied regularly
• reporting any failures in quality or efficiency immediately so that they can be identified and investigated with the help of the Supervisor
• ensuring that all traceability is maintained at all times
• assisting with maintenance work to facilities, plant and equipment within the workshop or in the open , when required
• operating forklift/electric pallet trucks in a safe and controlled manner
• putting on hold any parts out with specification and inform Supervisor/Inspector
• recording on/off working hours accurately and report any failed bookings immediately to the Supervisor
• reporting to: Machineshop Manager
• phosphating finished parts whilst maintaining the correct phosphate solution levels
• fulfil responsibilities under company HSEQ policies and as reasonably practicable the health, safety and welfare of others
• accurately recording and maintaining quality records
• reporting to Supervisor any failures in quality or efficiency immediately, also any processes or procedures identified that can improve quality and efficiency
• stamping/engraving finished parts
• sawing, handling and maintaining traceability of raw material and finished parts at all times
• ensuring all processes are carried out in accordance with company procedures and work instructions
• ensuring the care and maintenance of all machinery and equipment used
• carrying out general labouring duties as required, and assisting in the day-to-day operations in the Assembly and Test area when not painting - assisting in the disassembly, cleaning, and preparing of Pressure Control Equipment
• ensuring all processes are carried out in accordance with company procedures and work instruction
• accurately record and maintain quality records
• ensuring that all processes are carried out in accordance with the Company procedure

Requirements

• excellent communication , influencing and interpersonal skills
• high degree of commercial acumen
• highly professional conduct
  Show more +16
• essential
• must possess good basic education
• can do attitude
• must be willing to travel and able to spend time away from home
• standard grades or equivalent transferable experience and skills
• previous experience in painting with an airless paint system
• team player
• full UK Driving License
• certified training in all aspects of Bead Blasting, Phosphating, Swaging, Stress Relieving and Sawing
• forklift Training
• must have good time management and organisation skill
• excellent problem solving skills
• excellent problem-solving skills
• ‘Can do’ attitude and eagerness to learn and help
• gantry Crane Training
• full UK Driving Licence

Benefits

• company car

Trade

• production & Manufacturing
• Production & Manufacturing

Earnings for position labourer

Responsibility

• learning and understanding the "as is" environment to be able to provide functional expertise and knowledge of the existing business practices
• administration of engineering data
• working with Infrastructure and senior technical staff on Backups, phone system network and server equipment
  Show more +33
• providing end user training and assisting users with day-to-day issues, problems and questions
• migrating and managing data held in the ERP system to ensure consistency across the Group
• responsible for new user or user removal processing received from HR, including all related documentation and approvals required for each account
• collaborating with end users, project manager and management for system enhancements and upgrades
• supporting the development of procedures and documentation relating to the creation of new data, and maintenance of existing data
• ability to troubleshoot most general IT issues, understanding how, when and to whom an issue should be escalated if required
• working collaboratively with team members to troubleshoot and resolve Dynamics 365 issues
• liaising with Commercial and Operational Departments to amend data for the completion of orders
• responsible for working with outside departments regarding technical projects and special cases to meet company goals and needs
• proposing tangible solutions to avoid repeatable errors
• managing change through the ECN system
• tracking and recording metrics for review as requested by IT management
• providing guidance for system changes and enhancements
• supporting and carrying out contract review
• identifying continuous improvement opportunities for assigned systems and processes
• managing process for third party approval of engineering designs
• creating user accounts, deleting accounts, creating/changing permissions by account; user profiles, page layouts, security in Dynamics 365
• contributing to quality improvements in the Engineering Department
• creating and/or enhancing end user documentation / SOP and resolving daily execution issues with end users
• creation of part numbers and descriptions across the Group
• troubleshooting functional aspect of D365 as per tickets submitted by end users
• uploading and managing data held within Onbase
• updating and maintaining Hunting’s Standard Dynamics 365 Training material
• creating purchase requisitions
• availability requirementsThe IT Administrator may be required out of hours in case of a critical systems failure or other related emergency
• providing detailed documentation on issues that need to be escalated to our Microsoft Support Partner
• revising/updating technical drawings/documents
• ensuring Change Request process is being followed as documented in Hunting’s IT policies
• the IT Administrator will contact IT management or escalate tickets if any issue is above their experience level or if they require additional assistance
• updating and maintaining regression testing procedures within LCS
• assisting with answering questions related to end of year audit
• completing special projects and providing project support as requested by senior leadership
• experience in creating and maintaining user and technical documentation on processes, policies, application configuration and user help materials

Requirements

• excellent communication , influencing and interpersonal skills
• good communication , influencing and interpersonal skills
• excellent communication and interpersonal skills
  Show more +20
• high degree of commercial acumen
• A motivated self-starter with good time management skills
• attention to detail and ability to multi-task
• highly professional conduct
• excellent problem-solving skills
• essential
• HNC or equivalent experience in an IT related field
• must be willing to travel and able to spend time away from home
• good working knowledge of Microsoft technologies
• able to problem solve and a desire to learn
• educated to SQA Higher level or equivalent
• excellent customer service skills
• quick learner and willing to accept new challenges
• able to respond to complicated inquiries and effectively present information based on the audience
• ability to collaborate with end users and stakeholders
• good communication skills
• able to work in a team environment or independently
• customer service focused
• excellent analytical skills
• attention to detail, deadlines, and reporting

Benefits

• mobile phone

Responsibility

• undertaking a wide variety of engineering design from updating existing designs to working on new designs in line with business needs
• designing to requirements and specifications as defined ensuring appropriate cost and quality of product
• inputting to specifications as required, and ensuring a full specification is available and understood prior to commencing work
  Show more +13
• producing the relevant supporting documentation to ensure verification of design
• design models and drawings
• calculations
• assisting with regulatory submission and Certification Files
• test Plans, Procedures and Reports
• operations and Maintenance Manuals
• other technical documentation as required
• assisting with technical support, check the work of other Design Engineers or Design Draughters, as appropriate
• assisting with hands-on work during assembly and testing of prototype or new designs
• provide cover and support to the department as and when needed
• supervision/mentoring of Draughters/Trainee Design Engineers on specific tasks and track their project tasks on larger projects
• supporting of Field Testing
• project engineering level work as required

Requirements

• excellent communication , influencing and interpersonal skills
• high degree of commercial acumen
• highly professional conduct
  Show more +9
• degree in a Mechanical Engineering discipline
• must be willing to travel and able to spend time away from home
• product knowledge of oilfield surface and/or downhole equipment
• good team working skills and a high level of autonomy
• experience in designing oilfield products for example hydraulic control/injection units, pressure control equipment, wireline/slickline tools, structural frames, through tubing tools
• keen to learn and develop
• proficient in using 2D or 3D CAD software, ideally Autodesk Inventor
• able to perform calculations/analysis pertaining to the product design using appropriate software
• knowledge of material selection including metals, plastics and elastomers for oilfield use

Earnings for position senior design engineer

Responsibility

• have a complete awareness and understanding for all PCE and DHT’s working towards fault finding and trouble shooting
• reading and understanding of engineering/manufacturing drawings and assimilate data
• using Hydraulic Pumps for pressure testing PCE
  Show more +10
• water blasting of Hunting and customer owned PCE
• safely moving goods around via a Forklift and electric pallet truck
• disassembly, inspection, redressing, reassembly, pressure, and function testing of Wireline PCE tools such as Crossovers, Lubricators, Pump In Subs & Insitu Subs, Stuffing Boxes, Liquid Seal Subs, Greaseheads and Wireline Valves , Hydraulic Ball Valves, Non Hunting Products, Gate Valves & Ezi-Shear & Seal Valves
• disassembly, inspection, redressing, reassembly, pressure, and function testing of DHT’s such as Variball Roller Systems, Pulling Tools, Releasable Overshots, Wireline Accelerators, Hydraulic Jars
• assisting with maintenance work to facilities, plant, and equipment within the workshop or in the open , when required
• the job holder will be required to work overtime, sometimes on a regular basis to meet the needs within the department, which can often be requested at short notice
• gaining product knowledge on Hunting and customer owned PCE and DHT
• ensuring that Risk Assessments are completed accurately, and highlighted hazards are adapted accordingly to ensure zero risk for all personnel, for required duties
• the job holder is responsible for the assembly, testing and maintenance of Wireline - Pressure Control Equipment and Downhole Tools , in accordance with Company procedures
• deputising for the Senior Assembly and Test Technician as and when required

Requirements

• excellent communication , influencing and interpersonal skills
• good collaborative team working skills who takes responsibility for own work and similarly supports the achievement of company objectives
• proactive and self-motivated
  Show more +17
• essential
• hardworking, reliable, and able to work under pressure
• working knowledge of industry standards and specifications
• ability to work on own initiative, excellent time, and organisation skills
• highly professional conduct
• working knowledge of PCE and DHT
• mechanically sympathetic
• must be prepared to work in weather determined environments
• forklift Training
• high standard of personal and process safety
• manual handling
• must be willing to travel and able to spend time away from home
• high Pressure Water Jetting Awareness
• HNC/HND in Mechanical Engineering, or a relevant subject with proven experience in a similar role of at least two years
• full UK Driving Licence
• knowledge of Microsoft packages and ERP system, preferably Microsoft Dynamics AX
• supervisory training

Trade

• management
• Management

Responsibility

• have a complete awareness and understanding for all PCE and DHT’s working towards fault finding and trouble shooting
• reading and understanding of engineering/manufacturing drawings and assimilate data
• using Hydraulic Pumps for pressure testing PCE
  Show more +10
• water blasting of Hunting and customer owned PCE
• safely moving goods around via a Forklift and electric pallet truck
• disassembly, inspection, redressing, reassembly, pressure, and function testing of Wireline PCE tools such as Crossovers, Lubricators, Pump In Subs & Insitu Subs, Stuffing Boxes, Liquid Seal Subs, Greaseheads and Wireline Valves , Hydraulic Ball Valves, Non Hunting Products, Gate Valves & Ezi-Shear & Seal Valves
• disassembly, inspection, redressing, reassembly, pressure, and function testing of DHT’s such as Variball Roller Systems, Pulling Tools, Releasable Overshots, Wireline Accelerators, Hydraulic Jars
• assisting with maintenance work to facilities, plant, and equipment within the workshop or in the open , when required
• the job holder will be required to work overtime, sometimes on a regular basis to meet the needs within the department, which can often be requested at short notice
• gaining product knowledge on Hunting and customer owned PCE and DHT
• ensuring that Risk Assessments are completed accurately, and highlighted hazards are adapted accordingly to ensure zero risk for all personnel, for required duties
• the job holder is responsible for the assembly, testing and maintenance of Wireline - Pressure Control Equipment and Downhole Tools , in accordance with Company procedures
• deputising for the Senior Assembly and Test Technician as and when required

Requirements

• excellent communication , influencing and interpersonal skills
• good collaborative team working skills who takes responsibility for own work and similarly supports the achievement of company objectives
• proactive and self-motivated
  Show more +16
• hardworking, reliable, and able to work under pressure
• working knowledge of industry standards and specifications
• working knowledge of PCE and DHT
• ability to work on own initiative, excellent time, and organisation skills
• highly professional conduct
• mechanically sympathetic
• forklift Training
• must be prepared to work in weather determined environments
• manual handling
• high standard of personal and process safety
• high Pressure Water Jetting Awareness
• must be willing to travel and able to spend time away from home
• HNC/HND in Mechanical Engineering, or a relevant subject with proven experience in a similar role of at least two years
• full UK Driving Licence
• knowledge of Microsoft packages and ERP system, preferably Microsoft Dynamics AX
• supervisory training