Salary at MULTIMATIC

Responsibility

• role Summary
• finishing & Deburring Technician
• this brand new facility incorporates an extensive list of new equipment and facilities to enhance Multimatic’s leadership in this field
  Show more +54
• multimatic is a global automotive supply company providing hardware and engineering services to OEMs around the world
• working with pre-preg carbon fibre, the Trainee Composite Laminator will be responsible for kitting, layup, bagging and de-bagging of the component
• assist with EOL testing
• prepare components for coatings using various preparation methods
• dimensional validation of product
• manufacture tooling and components for high performance vehicles
• carry out composite vehicle Chassis and BIW assemblies and sub-assemblies by way of gluing in fixtures
• carry out composite vehicle Chassis and BIW assembly and sub-assembly tasks
• seal and release new tooling or pattern work either by hand or spraying, depending on the requirements of the part
• handle composite materials and follow established safety procedures
• the successful candidate will be trained to work to complex engineering drawings and with moulds to produce high precision composite components
• specialties include suspension systems, vehicle dynamics, carbon fibre structural components, mechanisms and mechatronics
• complex 4 wheel alignment with a good understanding of vehicle setups
• maintain paint prep tools including the spray facility
• prepare patterns for tool manufacture, layup carbon fibre tooling material
• prioritise and organise the workload dependent on customer demand
• ensure work is completed within the allotted time frame and to the highest level of quality
• complete any rework on old tooling and re-seal/release
• hand-laminate composite components to specifications provided by project engineers
• vehicle rectification with the highest level of quality standards
• mask appropriate areas as required
• core Responsibilities
• verify material kit received
• maintain a clean and organised work environment
• fill in build logs and route cards as part of the vehicle audit process
• prepare components for autoclave cure utilising vacuum bagging practices
• check and replenish stock levels, liaising with stores to re-order
• carrying out work in adherence to technical drawings, internal and external specifications and build instructions as appropriate ensuring accuracy
• high voltage systems
• inspect components during processing stages
• carry out Tool preparation
• prepare and apply sealants and release agents
• precision deburring of metal components using various tools and techniques
• carry out any rework on tooling and moulds, re-seal/release as required
• accurately mix and prepare adhesives for the bonding process
• follow build manuals and quality control processes
• painting of parts as per customer requirements
• prepare tooling patterns and moulds using chemical sealers and release systems
• bonding and trimming assemblies in accordance with defined processes
• working in a safe manner, following safety procedures in an automotive assembly environment
• consult and resolve quality issues as they arise
• hand layup pre-preg carbon fibre material as per instructions provided
• work with the Finishing Team to ensure parts are fully prepped ready for paint etc
• carry out surface preparation and cleaning prior to bonding
• completion of all relevant paperwork including route cards and daily time sheets
• train new starters and help others who need guidance
• fabricate moulds from supplied patterns
• fettling moulds and patterns would be an advantage
• as part of a new capital investment project, Multimatic has established a new dedicated facility to manufacture carbon fibre reinforced components for the premium automotive industry
• must comply with all ISO9001/IATF16949, ISO 14001 and OHSA systems and standards
• check and replenish stock levels of consumables, liaising with stores to re-order
• trim and adjust parts where necessary to achieve the required finish
• comply with all health and safety and PPE requirements
• location: Multimatic Special Vehicle Operations Europe, Huntingdon, Cambridgeshire, United Kingdom

Requirements

• ability to use hand tools and follow work instructions to a high degree of accuracy
• experience in chassis/BIW assembly and/or composite trimming and fitting
• attention to detail and ability to self-inspect work to ensure quality defects are mitigated and a continual pursuit of perfection
  Show more +26
• prior experience in the automotive or motorsport sectors is desirable but not essential
• ability to operate and programme CMM and measurement arms
• hands-on experience in a manufacturing environment
• understanding of engineering concepts, specifications and drawings
• understanding of a variety of measurement and inspection processes, methodologies and equipment
• interpret ply orientation based on knowledge of fibre orientation
• competent in paint spraying and the associated techniques
• willingness to learn and develop new skills
• good attention to detail
• ability to interpret basic instruction via detailed drawings/instructions
• experience in a low volume manufacturing environment, preferably automotive
• engineering / Motorsport background
• experience in auto body finishing and repair
• ability to follow written instructions and operate end of line quality test equipment
• confident user of a variety of hand and power tools
• ability to create templates from instructions provided
• self-motivated, high working standards with an eye for detail
• an eye for detail and pride in making things by hand
• self-motivated
• excellent verbal & written communication skills
• experience with Polyworks and JT2Go software packages
• experience of dealing with suppliers and internal customers
• we will consider candidates with all levels of experience
• experienced technician able to work on own initiative and follow detailed work instructions
• ability to interpret basic written instructions
• experience in using adhesives is beneficial

Trade

• installation & Maintenance
• Installation & Maintenance

Current offers for the position:

Responsibility

• manage and maintain MNVE Production supply base, to ensure goods are purchased at the best total acquisition cost
• develop robust commodity strategies and cost down plans to support business requirements
• support the Purchasing Manager by maintaining supplier relationships and negotiating
  Show more +52
• supplier Development / improvement plans
• primary interface for new project purchasing activity supporting the Mechanisms divisions
• aggressively pursue the commodity strategy to ensure competitive advantage / product cost leadership for Multimatic
• liaise with allocated suppliers on a daily basis
• break-down program cost targets with commodity buyers to identify opportunities and appropriate sourcing strategy
• purchase goods, materials, components or services in line with specified cost, quality and delivery targets to support MSVO motorsport projects
• liaise with the Programme Team and support the delivery of challenging on time product schedules
• ensure that the commodity strategy evolves to support changing market conditions and risk considerations
• obtain any required drawings or descriptions /BOM details to enable potential vendors for accurate quotes
• create and maintain Bills-of-Materials deriving from the engineering BOM, particularly in relation to the execeution of the purchasing requirements
• build, maintain and manage supplier relationships and keep up good communications
• ensure execution of key projects through close collaboration with the cross-functional team
• complete quoting activities with the commodity buyers and ensure on-time cost roll-up to division program teams
• work with the motorsport engineering team to develop purchasing strategies to support race car programmes
• maintain approved supplier list
• develop QAF library to ensure total acquisition cost
• act as an interface between suppliers and other relevant engineering and program departments
• develop commodity strategy for Group purchasing
• develop spreadsheets to support sourcing nomination decisions
• location: Multimatic Niche Vehicles Europe, Coventry , United Kingdom
• follow-up and communicate with vendors to ensure quote replies are received on time to meet quote review deadlines
• provide analysis on costs, new and existing, and review cost reduction activities
• support Purchasing Coordinator in developing spreadsheets to support sourcing nomination decisions
• negotiate global supply agreements with key suppliers, including LTAs, rebates, etc
• develop a cost down plan for production and MRO purchasing
• analyse and compile Quote Summary as quotes are received. Provide project roll-up cost summary and analysis leading to sourcing recommendations
• identify and evaluate supply chain risk whilst developing robust risk mitigation strategies where necessary
• manage SAP through Purchasing Department, including raising and forwarding Purchase Orders to suppliers
• develop strategy for assigned commodities to achieve material costs savings targets through detailed analysis of current spend, including consolidation and/or localization opportunities
• develop should-cost models by product family through analysis of best manufacturing process and market intelligence on raw materials, labour rates, etc
• provide MRO commercial support
• prepare reports and updates as and when required
• develop a cost down plan for production and consumables purchasing
• closely monitor the supply market with regards to pricing, commodity trends, supplier capacity, supplier news, industry news and new product/process developments
• obtain LTA agreements with vendors
• negotiate with vendors on commercial terms and technical aspects
• negotiate and purchase niche vehicle components such as: body systems, chassis panels, composite panel constructions, etc
• support NPI, quotations, vendor selection, PPAP process
• create and maintain a RFQ database / record of quote requests, replies and summary by OEM Manufacturers program designation
• prepare and raise purchase orders and order schedules
• support Quality team with problem resolution
• prepare appropriate Request for Quote [RFQ] packages for the Commodity Buyers to send to suppliers for new business quotations and ad-hoc cost savings/benchmarking activities
• participate in regular purchasing team meetings, sharing updates on KPIs and action plans or continuous improvement ideas to close gaps to target
• support Material planning team with problem resolution
• participate in Mechanisms Quote Reviews and AQP team meetings
• define strategic suppliers within the assigned commodities and foster strong relationships through regular contact and on-site supplier visits
• process ECN’s and issue all relevant information to suppliers, amend blanket orders etc
• support Supplier Development on audits and/or VAVE activities with the supply-base
• support Material planning team in reduction of inventory and shortages
• ensure that a professional and consistent approach is taken in relation to all supplier relationships
• follow all general, departmental and position procedures where applicable as indicated in the level III Procedure manual
• follow Q2A through program to verify on-going compliance / target achievement

Requirements

• minimum 3 years working in a procurement environment within the motorsport sector
• good knowledge of the constituent components of race cars and the associated manufacturing technologies of such components
• mechanical/Electrical Engineering Degree, Business Degree with Supply Chain Focus, and/or equivalent experience
  Show more +35
• bachelor’s degree in Supply Chain Management, Engineering, Business, Economics or equivalent
• ONC, A Levels, City & Guilds Level 3, BTec National Diploma Level 3 or equivalent NVQ level 3 qualification
• minimum of 2-3 years of experience in a manufacturing environment, preferably in Automotive
• experience in purchasing or supply chain, with a strong understanding of product and process should-cost methods
• good knowledge of purchasing, negotiation, commercial understanding and cost breakdown
• previous experience in automotive manufacturing environment would be an asset
• project management experience or knowledge of automotive APQP / PPAP is an asset
• proven negotiation techniques and understanding of automotive industry best practices
• computer experience preferred MRP systems, Windows environment
• experience of dealing with customers and suppliers
• broad understanding of machining, stamping, plastics, electrical components, and processing methods and procedures
• experience with supplier interaction for VAVE and cost reduction programs and processes
• knowledge and experience using SAP
• substantial experience in a low volume manufacturing environment, preferably automotive
• familiar with Supply Chain concepts and Incoterms
• knowledge and experience with Lean concepts and driving operational excellence
• good planning and organization skills
• good organization skills
• closing date for applications is October 31st 2023
• must possess the ability to read and understand engineering drawings
• broad understanding of manufacturing processes
• previous Materials/Purchasing experience
• previous Materials/Purchasing/Logistics experience
• if you are interested in this position, apply by sending us your cover letter and resume
• the ability to plan and meet deadlines
• we thank all interested candidates in advance; however, only individuals selected for interviews will be contacted
• equivalent of grade 12/GCSE Grade C formal education
• above average communication and interpersonal skills
• self-starter and proactive. Ability to successfully engage and interact with all levels of employees in a multicultural environment
• ability to successfully engage and interact with all levels of employees in a multicultural environment
• excellent written and oral communication skills
• must be able to interact with all levels of employees within a multicultural environment
• understanding of IATF16949 requirements and procedures would be an asset
• familiar with IATF16949 and ISO14001 standards
• must have UK Right to work

Current offers for the position:

Responsibility

• multimatic - Solving our customers’ problems through the know-how we embed in the products and services we sell
• multimatic is a global automotive company providing hardware and engineering services to OEMs around the world
• take ownership of the product and represent it internally across the divisions in Multimatic and externally to the customers
  Show more +59
• own and design the physical Electrical Distribution System for full vehicles with the input and support of the integration engineering team
• carrying out supplier qualification assessments including detailed on-site process audits
• we are seeking a Systems Engineer to join our growing engineering team based in Milton Hall in Cambridge
• own and Lead system function development and verification
• design for manufacture new module housings for Multimatic electrical products
• preparing sourcing recommendations based on the results of supplier assessment activities
• manage packaging, routing and retention for wiring harness components
• communication and implementation of supplier quality and inspection requirements
• this will include System requirements analysis and generation, System architecture design, and System verification and validation
• cascade functional requirements to all supporting Systems and Sub-systems, across all affected engineering disciplines
• liaise with engineering teams to find the best solution to packaging challenges, compromising where necessary, championing where appropriate
• leading the implementation of supplier development activities with the aim of delivering year-on-year supplier QCD improvements
• ensure that the technical solution meets the customer, legislative and business requirements
• integrate with the Body Engineering Teams to champion EE requirements within a whole vehicle system
• establishing supplier scorecards monitoring quality, delivery and commercial performance
• location: Multimatic Electronic Systems UK, Cambridge, Cambridgeshire, United Kingdom
• location: Multimatic Electronic Systems UK, Thetford, Norfolk, United Kingdom
• develop and document system architecture, design, and acceptance and verification strategies
• support component and vehicle sign-off for production
• leading the successful implementation and owning the delivery of specific APQP / PPAP for New Product Introduction and sourcing activities
• its newly formed Cambridge based electronics division, Multimatic Electronic Systems , will meet the growing needs of our automotive customers in electronics hardware and software control
• its newly formed Cambridge based electronics division, Multimatic Electronic Systems , will meet the growing needs of our automotive customers in electronics and whole vehicle integration programs
• its newly formed Cambridge based electronics division, Multimatic Electronic Systems , will meet the growing needs of our automotive customers in electronics and whole vehicle integration projects
• deliver the systems engineering tasks for a project on time and on budget, including work package management
• supplier management and sourcing for components and integration support
• working closely with Quality, Engineering, Manufacturing and Programme Management on supplier selection for new products and services
• combining our new products with Multimatic’s existing expertise in suspension systems, vehicle dynamics, mechanisms and mechatronics will enable us to go to market with complete active suspension, active aero and powered door products to our customers in the future
• combining our new products with Multimatic’s existing expertise in suspension systems, vehicle dynamics, mechanisms and mechatronics will enable us to go to market with complete active suspension, active aero, powered door and full vehicle EE architecture offerings to our customers in the future
• combining with our new products with Multimatic’s existing expertise in suspension systems, vehicle dynamics, mechanisms and mechatronics will enable us to go to market with complete active suspension, active aero and powered door products to our customers in the future
• the building of the lab cars, HiL and test rigs required to carry out the development, testing and validation of electronic modules on both component and whole vehicle electrical systems
• ideal Experience
• interacting with the customer to capture requirements and manage issues
• approving new products and services in line with company procedures
• we also need someone who doesn’t mind rolling up their sleeves to get a job done when needed
• we are seeking an EE CAD Engineer to join our team and support development of a growing team for Niche Vehicle Integration for clients in the automotive industry
• we are seeking an EE Integration Engineer to join our team and support development of a growing team for Niche Vehicle Integration for clients in the automotive industry
• experience in negotiating and agreeing system requirements with customers and stakeholders
• assist in the development of project plans including timing and deliverables
• you will be responsible for the Systems Engineering aspects of our automotive electronic control products, covering all aspects of the systems engineering lifecycle
• working directly with our customers , you'll be responsible for capturing stakeholder needs, deriving customer-facing requirements and use cases from them, and managing changes
• the successful candidate will be joining Multimatic Electronic Systems at a very exciting time as the division embarks on multiple projects to deliver full vehicle electrical architectures; these projects will require EDS Design and Engineering support within the engineering department, supporting the body engineering and integration engineers to deliver electrical infrastructure solutions
• the successful candidate will be joining Multimatic Electronic Systems at a very exciting time as the division embarks on multiple projects to deliver full vehicle electrical architectures; these projects will require applications support within the engineering department and on-site with the customer
• automotive system and design experience for requirements capture, analysis and management
• key strengths required for the role include the ability to operate independently, a problem-solving mindset, the ability to communicate efficiently and comfort with taking on responsibilities
• own part numbering and champion version control, requirement definitions and change tracking
• key strengths required for the role include the ability to operate independently, a willingness to travel and support customers on-site, the ability to communicate efficiently and the ability to take-on responsibilities
• A good appreciation of mechanical, electrical and software engineering principals
• be part of the development of Multimatic engineering tools and development systems for electronic components and systems
• you will be part of a highly capable team split between Cambridge and Toronto with customers spread across the globe
• most importantly we need someone who will embrace our culture – finding ways to say “yes” and delivering excellent solutions for our customers
• you will be working with a range of projects and customers – some with clearly defined requirements, some who rely on our experience and expertise to help develop them
• ability to anticipate, translate and develop requirements into robust solutions
• work closely with other disciplines, such as outside suppliers and integration and mechanical engineers, to achieve the project requirements
• work closely with other disciplines, such as outside suppliers and mechanical engineers, to achieve the project requirements
• liaise with third party test houses and other relevant suppliers with the booking of relevant tests
• so, we need someone who can communicate well, who can build relationships with our customers and who has a good understanding of our end products and the engineering work required to create them
• 12. Analysis and reporting of supplier quality incidents
• knowledge and experience with ASPICE and ISO26262 systems and processes
• 14. Support and adhere to policies, procedures, and operational guidelines related to established quality management systems

Requirements

• minimum HNC/HND third level qualifications
• preference will be given to candidates with Degree level in Mechanical Automotive Engineering, but this is not essential
• experience of IATF16949 standard an advantage
  Show more +9
• at least 3-4 years’ experience
• experience gained in a supply chain quality environment, preferably in high volume automotive manufacturing business, but not essential
• experience of automotive supplier assessment and selection activities
• experience of auditing both internal and supplier processes
• experience of supplier development programmes to drive quality improvements
• knowledge of APQP tools and techniques
• knowledge of statistical analysis, process capability and problem resolution tools and techniques
• knowledge and experience of automotive product development process and activities
• good communication and professional presentation skills for customer and supplier interfacing

Trade

• industrial Engineering
• Industrial Engineering

Current offers for the position:

Responsibility

• CNC Programmer/Turner
• multimatic supplies innovative components, systems, complete vehicles, and engineering services to customers around the world
• multimatic is a global automotive supply company providing hardware and engineering services to OEMs around the world
  Show more +38
• programming and operating multi-axis milling machines
• specialties include suspension systems, vehicle dynamics, carbon fibre structural components, mechanisms and mechatronics
• producing precision components to exacting standards and tolerances
• sliding Head CNC Programmer - Setter - Operator - Turning
• working to tight deadlines and schedules
• we are looking for an experienced PROGRAMMER/TURNER proficient in programming/setting Haas TL Semi-Auto Lathes to join our leading Motorsport/Automotive Machine Shop
• we are looking for a CNC Sliding Head Turner to join our world class Machine Shop
• proactively contributing and working within the machine shop team
• you will program, set and run Citizen Sliding Head Multi Axis L32 Lathes
• location: Multimatic Technical Centre Europe, Thetford, Norfolk, United Kingdom
• organised in to five different operating groups, Multimatic’s Engineering group was established to support the design, analysis, and testing required to deliver exceptional products to our customers
• its UK based engineering division, Multimatic Technical Centre Europe , is a leading supplier of engineering and vehicle development services to major automotive OEMs and a growing number of niche vehicle manufacturers
• as a part of the Multimatic Engineering group, Multimatic Technical Centre Europe is located in Thetford, Norfolk and is the development centre for Multimatic’s DSSV damping technology while also providing a wide range of engineering services to internal and external customers around the globe
• considerable CNC working knowledge of Fanuc and Haas controls
• planning, coordinating tooling purchase to support each part and ensure gauges are requested if required
• location: Unit 1, Wyatt Way, Thetford, Norfolk, IP24 1HB
• meet Deadlines: Your aptitude for working under tight schedules and deadlines will be an asset
• the unique ability to work to tight prototype lead times, consistently reproducing high quality machined products
• team Player: Your proactive spirit will harmonise seamlessly within our machine shop team
• location: Multimatic Technical Centre Europe, Unit 1, Wyatt Way, Thetford, Norfolk, United Kingdom
• you will have 10 years’ experience of making complex turned components in Aluminium, Steel, Stainless steel and Titanium, with a good understanding of GD&T detailed drawings an advantage
• work well as part of team and prepared to be flexible to meet the needs of the team & customer demand
• logging and cataloguing of the CNC programs through in house software database
• you will have experience and the capability of working to 0.01mm diametric tolerances and the ability to manufacture parts from samples and work on own initiative
• using all types of alloys, stainless steel, mild steel and titanium you will be required to machine small batches of components to support the research and development of automotive assemblies, while maintaining standards of accuracy and finish
• you will have served a recognised apprenticeship and hold the relevant qualifications, with a proven machining background in a fast paced precision engineering environment
• experienced in all aspects of programming, setting and operation of Citizen or Star Sliding Head Lathes with experience including materials and finishing processes of manufactured components
• enthusiastic with a positive can do attitude
• optimizing production techniques to increase efficiency
• extensive knowledge of setting and operating multi axis machine tools to achieve maximum efficiency and the highest quality standards machining precision components
• using CNC Sliding Head Lathes using Fanuc and Fanuc based programming you will be responsible for writing programs, setting including 1st off verification before quality control inspection and running the machines to produce precision components from engineering drawings
• follow all manufacturing procedures to complete the required parts
• participate in resource planning activities
• master the Art of Precision: You'll program and operate multi-axis milling machines, sculpting precision components that adhere to the most demanding standards and tolerances
• this role is offered on a full time permanent contract with working hours of 42.5 hours per week
• ensuring a detailed handover between night and day shift
• perform basic daily maintenance to machines e.g., cleaning, lubrication etc
• supports and adheres to policies, procedures, and operational guidelines related to established quality management systems

Requirements

• sound knowledge of basic machining and engineering principles
• ability to read engineering drawings
• competence in the use of manual measuring equipment
  Show more +7
• willing to learn and capable of running CNC milling machines
• confident using a PC with some IT experience
• solid Foundation: A solid grasp of basic machining and engineering principles is crucial
• read to Succeed: Ability to read and interpret engineering drawings is essential
• measure Up: Competence in using manual measuring equipment is a must
• ready to Learn: A willingness to learn and operate CNC milling machines
• tech-Savvy: confidence using systems, digital and computerised technology

Trade

• production & Manufacturing
• Production & Manufacturing

Current offers for the position:

Responsibility

• as a Design Engineer you will be involved in developing designs for high-volume automotive applications that are robust, lightweight, and cost effective
• this will involve reviewing package data , creating design concepts that meet all of the performance requirements, generating DFMEAs, defining analysis requirements, optimizing the design, creating drawings for prototype and production builds, initiating tests to verify the performance, etc
• throughout the development process the Design Engineer will have to work closely with other departments at MTCE , Multimatic’s manufacturing division , suppliers, and the OEM

Requirements

• engineering Degree or equivalent
• experienced with component design from concept to production in automotive or aerospace industries
• knowledge of GD&T, typical automotive materials and manufacturing methods
  Show more +4
• creation of DFMEAs, CTS, DVPRs, technical reports
• proficient in 3D CAD & 2D technical drawing software
• strong written, verbal and presentation skills
• valid driver’s license & passport, and be prepared for international travel when required

Trade

• information Design & Documentation
• Information Design & Documentation

Earnings for position design engineer

Current offers for the position: