DIAMOND LIGHT SOURCE

Responsibility

• about Us
• about the Role
• carrying out metrology and inspection tasks on engineering components using a range of measurement instruments
  Show more +61
• carrying out metrology and inspection tasks on engineering components using a range of measurement instruments including programming and operating CMM
• contribution to the system optimisation and procedure development of RF systems
• helping to maintain the equipment already existing on the beamline
• design and build of ‘in house’ test equipment
• preparing the equipment and areas for vacuum installations
• maintaining, development and upgrading of existing detector components
• the Diamond synchrotron consists of advanced engineering components that are used to accelerate electrons and generate high intensity X-rays
• supervising and coordinating the installation and commissioning of specialist equipment, with cross-groups resource planning
• producing the documentation to ensure correct safe working and effective installations are achievable
• collecting scanning measurement data with a portable laser scanner for CAD comparison and reverse engineering
• operation and maintenance of low-power RF equipment including drive amplifiers and associated systems
• assist in the drawing up of manufacturing and test specifications
• working with the beamline scientists and engineers in designing and installing new beamline equipment as part of upgrades
• supervising junior internal or external staff / contractors
• advising on the purchasing and procurement of equipment
• supervising and coordinating the installation and commissioning of specialist beamline equipment, with cross-groups resource planning
• many of these components must be manufactured and positioned to very tight tolerances
• undertaking vacuum inspection and acceptance testing of vacuum components
• setting out geometric reference datum points for accelerator and beam line installation
• ensuring state of the art performance and reliability is maintained through future development
• complying with, and contributing to the development of, Health and Safety procedures and policies
• utilising the quality control and quality procedures of the Diamond project
• undertaking testing and fault finding
• taking part in operational planning, liaising with, and coordinating tasks with members of other specialist technical and engineering support groups
• assisting and advising on the correct procedures and techniques for UHV installations and testing
• diamond Light Source is the UK’s national synchrotron; a huge scientific facility designed to produce very intense beams of X-rays, infrared and ultraviolet light
• carrying out dimensional surveys of the diamond survey network to enable best fit adjustments to be computed
• RF test and measurement equipment operation and calibration
• occasional shift work during commissioning and in support of regular operations will be required, as will some UK travel
• interpreting sketches and information to produce simple engineering drawings for machining production or 3D printing
• designing and building new equipment and technical assistance to develop new equipment
• assisting with vacuum equipment and project Lab tests
• assisting scientists in support of User experiments
• working within an ultra-high vacuum clean assembly environment
• our scientists use the light to study a vast range of subject matter, from new medicines and treatments for disease to innovative engineering and cutting-edge technology
• surveying and adjusting the position of accelerator and beam line components during installation to ensure alignment tolerances are achieved
• fault finding, repair and performance analysis
• the Radio Frequency group at Diamond operate, maintain, and develop RF equipment essential for the functioning of the synchrotron
• using a mill, lathe, CNC, or similar tools to modify or manufacture mechanical parts
• monitoring equipment maintenance requirements
• preparing and installing equipment for upcoming experiments, removal afterwards and making safe
• general laboratory work including some build of electronic devices and some mechanical assembly
• advising on the purchasing and procurement of Vacuum Group equipment
• carrying out pre-alignment tasks on accelerator and beam line components using 3-dimensional measuring systems
• undertake the design, construction, and documentation of electrical/electronic circuits
• contributing to risk and method statements
• you may also be called upon during experiments to fault find and effect repairs or modifications
• carrying out and assisting with the preparation of safety risk assessments and method statements
• we now have an excellent opportunity for a Senior Survey Technician to join our Survey and Alignment Team to help with component inspection and final alignment
• following and completing work procedures and producing inspection reports
• day-to-day management and inventory control of the RF laboratory and equipment within
• this includes 25 days annual leave plus 13 days of statutory and company holidays and 2 annual volunteering days, along with flexible working hours and an excellent pension scheme
• fault finding and effecting repairs or modifications during experiments
• about you
• carrying out a variety of light mechanical and electrical assembly tasks , including one-off small-scale fabrications, machining, and modifications
• to carry out a variety of light mechanical and electrical assembly tasks , including one-off small-scale fabrications, machining, and modifications
• complying with all Diamond Health and Safety procedures and policies
• carrying out routine survey and alignment functions during shutdown periods to ensure operational parameters are maintained
• staff also have access to a range of amenities on site including a nursery, cafes, a restaurant and sports and leisure facilities
• working closely with other technical, engineering, and scientific staff to produce designs new systems, equipment or processes
• facilitating the installation and commissioning support for specialist detector equipment and readout electronics, including working on all electronic aspects of the scientific instrumentation from boards to racks and cooling equipment, and installation of sensors for items such as water flow and temperature monitoring

Requirements

• using quality assurance procedures, work planning, risk assessments and safe systems of work, including COSHH, PUWER etc
• using quality assurance procedures, work planning, risk assessments and safe systems of work
• use of laser trackers
  Show more +27
• RF test equipment
• cryogenics and water-cooled systems
• experience in the use of laser trackers, theodolites, and Electronic and Optical measuring equipment
• application of survey/industrial measurement techniques
• leak detectors
• interpreting mechanical drawings to produce simple engineering drawings for machining production of 3D printed items
• carrying out precision survey measurements to 0.1mm
• electronic and RF design
• precision mechanics
• extensive experience in carrying out precision survey measurements to 0.1mm
• residual Gas Analysers
• assembly to drawings and tolerance specifications
• computerised data logging and post processing data and producing intelligible reports
• electrical health and safety issues
• high temperatures/pressures and the handling and use of specialist gases/vapours
• experience in computerised data logging and post processing data and producing intelligible reports
• machining and manufacturing techniques
• ability to carry out optical survey measurements, carry and set up equipment <25kg reasonable distances around the facility
• quality Control Systems
• geometric transformations as utilised within multiple co-ordinate systems
• electrical and electronic fault finding
• ultra-high vacuum systems, fittings, and pumps
• A good understanding of geometric transformations as utilised within multiple co-ordinate systems
• QC/QA systems
• work and resource Planning
• handling/disposal of hazardous substances and chemicals
• work and resource planning

Earnings for position senior technician

Responsibility

• harwell Campus, Oxfordshire - onsite working
• about Us
• diamond Light Source is the UK’s national synchrotron science facility
  Show more +66
• about the role
• helping to maintain the equipment already existing on the beamline
• designing and/or making simple jigs/fixtures and tooling to facilitate assembly work
• carrying out inspection of manufactured items to drawings
• supervising and coordinating the installation and commissioning of specialist equipment, with cross-groups resource planning
• we now have an opportunity for a Mechanical Technician or Support Technician within the Diamond Insertion Device group
• supervising and coordinating the installation and commissioning of specialist beamline equipment
• working with the beamline scientists and engineers in designing and installing new beamline equipment as part of upgrades
• supervising junior internal or external staff / contractors
• producing simple manufacturing sketches
• carrying out machining to drawings, design jigs and fixtures and manufacture where necessary
• interacting with both the scientific beamline staff and facility users to ensure the beamline’s facilities and equipment can meet scientific requirements
• about the Role
• providing first line diagnosis of electromechanical faults that arise in the operation of the devices
• assisting with the maintenance and upgrading of existing insertion devices
• during experiments you may be called on to fault find and effect repairs or modifications in a timely manner
• taking part in operational planning, liaising with, and coordinating tasks with members of other specialist technical and engineering support groups
• we now have an opportunity for a Mechanical Support Technician or Mechanical Technician within the Diamond Insertion Device group
• your role will be to support scientists and technical support groups during maintenance, commissioning, and operations
• the Mechanical Technician will contribute to the mechanical assembly, testing, installation, maintenance and upgrading of insertion devices
• working closely with other technical, engineering, and scientific staff to produce new systems, equipment or processes
• interpreting sketches and information to produce simple engineering drawings for machining production or 3D printing
• designing and building new equipment and technical assistance to develop new equipment
• maintaining appropriate documentation of ID assembly and maintenance
• diamond Light Source is one of the most advanced scientific facilities in the world, and its pioneering capabilities and talented staff are helping to keep the UK at the forefront of scientific research
• carrying out general laboratory/workshop work as required
• diamond Light Source is the UK’s national synchrotron; a large scientific facility designed to produce very intense beams of X-rays, infrared and ultraviolet lights
• diamond Light Source is the UK’s national synchrotron; a huge scientific facility designed to produce very intense beams of X-rays, infrared and ultraviolet light
• supervising internal or external staff / contractors
• using a mill, lathe, CNC, or similar tools to modify or manufacture mechanical parts
• assisting in the finding of suppliers and the procurement of mechanical components and consumables
• our scientists use the lights to study a vast range of subject matter, from new medicines and treatments for disease to innovative engineering technology and cutting-edge materials
• our scientists use the light to study a vast range of subject matter, from new medicines and treatments for disease to innovative engineering and cutting-edge technology
• candidates should demonstrate a combination of proven technical experience, as well as an engineering apprenticeship, ONC or equivalent qualification within engineering
• using a mill, lathe, CNC, or similar tools to modify or manufacture mechanical parts as needed
• some flexibility over working hours will be required during periods of intense activity, and occasional local travel may be required
• you will contribute to the mechanical assembly, testing, installation, maintenance and upgrading of insertion devices
• occasional travel within the UK and overseas including overnight absences may be required
• by accelerating electrons to near light-speed, Diamond generates brilliant beams of light from infra-red to X-rays which are used for academic and industry research and development across a range of scientific disciplines including structural biology, physics, chemistry, materials science, engineering, earth, and environmental sciences
• contributing to risk and method statements
• carrying out inspection and acceptance testing of components and subsystems
• diamond is one of the most advanced scientific facilities in the world, and its pioneering capabilities and talented staff are helping to keep the UK at the forefront of scientific research
• fault finding and effecting repairs or modifications during experiments
• following up supply contracts, including visits if required
• about You
• we now have an opportunity for a Mechanical Beamline Technician to work at the forefront of our work by supporting scientific research on our beamlines
• you will demonstrate the ability to understand and interpret mechanical drawings
• preparing and installing equipment for upcoming experiments, removal afterwards and making safe
• about you
• carrying out a variety of light mechanical assembly tasks , including one-off small-scale fabrications, machining, and modifications
• we now have the opportunity for a Mechanical Technician / Senior Mechanical Technician to maintain and support operational and scientific research activities on the I12, the Joint Engineering, Environmental and Processing Beamline beamline at Diamond
• you should have an aptitude for practical mechanical work, with familiarity with measuring instruments, alignment methods and machining experience beneficial
• you will be working across our Structures and Surfaces Group, which includes four beamlines and several laboratories dedicated to the studies of the detailed atomic structures, chemical properties, and electronic behaviours of materials
• some flexibility over working hours will be required during periods of intense activity, and occasional travel may be required
• you may also be called upon during experiments to fault find and effect repairs or modifications
• JEEP is a multi-technique facility that provides intense radiation in the high-energy X-ray spectrum for imaging and diffraction studies of engineering components, materials, and processes, under realistic conditions
• the ability to understand and interpret mechanical drawings is required at Technician level
• this role will focus on Beamline I09, which delivers x-rays and fully equipped ultrahigh vacuum end stations containing an extensive suite of instrumentation
• synchrotron insertion devices are permanent magnet assemblies which lie at the heart of the Diamond facility, generating the brilliant light that is used in the experiments
• you will work also with other staff from the other beamlines of the Imaging and Microscopy group to support their operations
• taking part in operational planning, liaising with, and coordinating tasks with members of other specialist technical and engineering support groups across the wider organisation to complete various works, inspections and maintenance according to plan as well as scheduled safety testing and managing the day-to-day running of beamline equipment
• helping users to carry out experiments, machining small pieces of equipment such as sample holders or interface plates and integrating ancillary equipment into the experimental areas
• experience with cranes and slings etc. for heavy lifting and of working within a large facility would also be advantageous
• helping Diamond users to carry out experiments, machining small pieces of equipment such as sample holders or interface plates and integrating ancillary equipment into the experimental areas
• the main responsibility is to support the scientists and technical support groups associated with the beamline during beamline maintenance, commissioning, and operations
• we now have an opportunity for a Mechanical Technician in join the Diamond Engineering Group, which is responsible for the assembly, upgrades, installations, and maintenance of the Diamond Accelerators Front Ends, Insert devices and Beam lines

Requirements

• cryogenics, assembling complex systems, ultra-high vacuum, specialist gases
• ultra-high vacuum systems, fittings, pumps and working practices
• cryogenics
  Show more +17
• cryogenics, permanent magnets, high pressures, ultra-high vacuum would be beneficial but is not essential as training will be provided
• cryogenics and water-cooled systems
• precision mechanics
• permanent magnets
• familiarity in quality assurance procedures and work planning and safe systems of work
• interpreting mechanical drawings and the ability to produce simple engineering drawings for machining or production of 3D printed items
• high temperatures/pressures and the handling and use of specialist gases/vapours
• high pressures
• assembly to drawings and tolerance specifications and fitting as needed
• handling/disposal of hazardous substances and chemicals
• ultra-high vacuum systems, fittings, and pumps
• ultra-high vacuum
• motion systems
• swagelok
• you will demonstrate good communication and interpersonal skills, to interact with people at all levels
• scientific instrumentation
• water services pipework

Earnings for position mechanical technician

Responsibility

• about Us
• diamond Light Source is one of the most advanced scientific facilities in the world
• from viruses and vaccines to alternative energy solutions and nanotechnology, it underpins research and innovation for more than 8000 scientists
  Show more +40
• about the role
• sensor selection, procurement, data processing and interpretation of vibration data
• maintaining a current knowledge of other comparable projects and communicating with scientists and engineers at other international facilities and conferences
• about the Role
• the stability of the electron and photon beams at Diamond is key to the delivery of world leading science
• design, development, commissioning, and operational support of high-performance computing systems
• support, maintain and operate a range of vibration measurement equipment including accelerometers, seismometers, and data acquisition systems
• co-ordinating relationships with suppliers to procure and deliver services, equipment or expertise
• engaging closely with subject matter experts in a variety of technical fields to inform the development of new systems
• communicating findings to both internal audiences and international experts
• collaborating with the other groups to identify areas of research that would help to further improve diagnostics systems
• integrating and deploying new HPC systems such as novel servers and hardware
• diamond Light Source is the UK’s national synchrotron; a huge scientific facility designed to produce very intense beams of X-rays, infrared and ultraviolet light
• troubleshooting, diagnosis, and resolution of faults in our HPC clusters
• it houses the UK’s synchrotron light source, producing beams of light 10 billion times brighter than the sun, to probe the structure and composition of matter
• our scientists use the light to study a vast range of subject matter, from new medicines and treatments for disease to innovative engineering and cutting-edge technology
• we’re looking for an enthusiastic Senior Vibration Engineer / Physicist to support our vibration and stability work
• develop automation tools for system administration tasks
• your role will be to initially support, and then lead, a range of vibration and stability projects
• diamond is one of the most advanced scientific facilities in the world, and its pioneering capabilities and talented staff are helping to keep the UK at the forefront of scientific research
• develop monitoring and reporting solutions to increase the observability of our clusters and related Data Centre infrastructure
• diamond’s Scientific Computing Group provides an extensive computing infrastructure that supports Scientists in their efforts to capture experimental information, process and visualise terabytes of multidimensional data on the fly, and apply complex mathematical, fitting, or theoretical models to interpret their results
• contributing to the processes and associated software development to support the design and operation of computer systems at Diamond
• you should be qualified to degree level in Physics or Engineering or demonstrate significant equivalent experience
• we now have an opportunity for a talented Senior DevOps Engineer to join our Cloud Team, working to support the growing use of cutting-edge scientific software deployed in a Cloud Native environment
• with a multi-million-pound upgrade project underway, known as Diamond-II, the much stricter beam stability requirements of sub-micro electron beam stability over a circumference of 560m, will require increased dedicated efforts to maintain such high standards
• the infrastructure managed by the Scientific Computing Group ranges from on-premises Kubernetes based platforms, to off-prem Openstack Clouds offering high throughput computing as a service
• we now have a new opportunity for a Senior Vibration Engineer or Physicist to provide expert technical knowledge and hands-on evaluation to support Diamond’s vibration and stability
• the development of synchrotron technology proceeds at a blistering, relentless pace and requires a cutting edge and exceptionally resilient technical estate to facilitate its critical work, turning theoretical science into practical and often life-changing discoveries
• this is a cross functional role based in Diamond’s Technical Division, which involves working closely with the Diagnostics group and the Science Division, to measure and assess the effects of mechanical vibration on the photon and electron beams on the beamlines and particle accelerator
• suitable candidates should be qualified to degree level in Physics or Engineering, or demonstrate significant equivalent experience, with a relevant post graduate qualification desirable
• the Senior DevOps Engineer will help drive this innovation forward and help exploit the use of Cloud Native infrastructure to enable science
• suitable candidates should have a good understanding of the physical and mechanical principles behind vibration and stability, together with a broad general physics knowledge
• all candidates should demonstrate knowledge and experience of experimental techniques, data analysis, RF systems and electronics development. Knowledge and experience in beam diagnostics is beneficial
• you will be measuring and evaluating the stability of key components of the Diamond-II synchrotron upgrade, including diagnostic equipment supports and our girder prototypes
• you should have a good knowledge and understanding of sensors for vibration measurements and data collection processes and equipment. You should also have some experience with hands-on, practical work using measurement equipment and instrumentation
• the role will involve stability problem solving of Diamond systems and equipment, including developing passive and active damping solutions using 3D CAD modelling software, Finite Element Analysis & Dynamics simulation
• staying up to date with emerging compute and storage technologies and trends, evaluating their potential impact on research computing for the facility e.g. via engagement with related external technical communities and conferences
• about You
• you will demonstrate good interpersonal, communication and presentational skills, with the ability to interact effectively with staff and facility users at all levels

Requirements

• developing and deploying production quality software written in Java, Python or Golang
• apply technical know-how on active safety systems to ensure that the developed systems meet the goals of required safety integrity level
• safety systems design
  Show more +16
• production ready monitoring and logging systems, preferably in a Cloud Native environment using tools such as Prometheus
• capture and maintain documentation and Electrical wiring diagrams for Personnel Safety Systems that ensures compliance with international standards
• safety related components
• production systems such as Kubernetes that run containerised applications
• CAD packages
• assist with statistical analysis of the installed Personnel Safety System to verify its integrity level and functional correctness
• configuration management and DevOps tooling
• monitor and report on work-packages related to Personnel Safety System by external suppliers including preparation of tenders and service level agreements
• implementing CI/CD pipelines for business-critical applications
• maintain records of subsystem modules & software revision history
• modern programming languages such as Golang, Java, or Python
• analyse failures and maintain the safety assessment system
• customer/user facing issues
• contribute to the design and development of the Personnel Safety Systems to protect staff, users and public from the radiation hazards across Diamond
• carry out fault finding and corrective action planning on installed equipment
• ansible, Gitlab, and Kubernetes is highly desirable

Earnings for position senior engineer

Responsibility

• about Us
• diamond produces beams of intense light to probe the structure and composition of matter
• embedded within Diamond is the UK's national centre for cryo-Electron Microscopy
  Show more +29
• developing, testing, maintaining, and supporting software solutions for automated data analysis at eBIC
• implementing industry standard software engineering practices to ensure sustainability of software solutions
• about the Role
• practising and sharing modern software engineering approaches and participating in code reviews
• tightly integrated data analysis is essential to provide users with real-time feedback on the outcomes of experiments
• diamond Light Source is the UK's 3rd generation synchrotron source and is one of the most advanced scientific facilities in the world
• responding to data analysis related supported requests from eBIC scientists and users
• diamond Light Source is the UK’s national synchrotron; a huge scientific facility designed to produce very intense beams of X-rays, infrared and ultraviolet light
• our scientists use the light to study a vast range of subject matter, from new medicines and treatments for disease to innovative engineering and cutting-edge technology
• the software we design and implement across Diamond requires innovation, robustness, and performance at its core
• from viruses and vaccines to alternative energy solutions and nanotechnology, it underpins research and innovation for more than 8000 scientists, with over 90 companies already advancing science using its services
• diamond is one of the most advanced scientific facilities in the world, and its pioneering capabilities and talented staff are helping to keep the UK at the forefront of scientific research
• the software that you write will routinely integrate open-source software solutions and interface with other critical software infrastructure across Diamond
• about You
• eBIC was the first cryoEM centre to be integrated with a synchrotron facility and provides a unique platform for imaging of biological samples both at the molecular and cellular level
• you will contribute directly to the delivery of scientific results in one of the most important areas of research for Diamond, single-crystal X-ray diffraction
• you will join a team of scientists and engineers who develop world-leading tools and algorithms [1, 2] as well as the open-source infrastructure [3, 4] which underpin the near real-time delivery of pertinent scientific results to our users
• we now have an opportunity for a Data Analysis Scientist to join our data analysis group and to work closely with our scientists at eBIC to develop data analysis tools in the cryoEM area
• [1] github.com/dials/dials
• the Data Analysis Group is responsible for providing research software to analyse data generated from our diverse range of scientific facilities that exploit the synchrotron light from Diamond as well as data acquired from eBIC
• liaising with members of the Scientific Computing group, in particular cluster admins and cloud team, to ensure smooth operation of eBIC processing pipelines
• your role will be to support and develop this further, with a focus on biological crystallography but also to contribute to supporting other techniques and experiment types
• this will involve working closely with scientists, methods developers, and data acquisition engineers to define requirements and implement pragmatic solutions to challenges as they arise
• [2] github.com/xia2/xia2
• while this software is primarily developed in-house for our own needs, where possible, developments are made with a view to facilitating its use by other facilities
• the role will focus on development of workflows for cryoEM data analysis. You will be a member of a small team of developers and work closely and collaborate with our scientists at eBIC
• our existing software solutions are primarily based around Python, Java and C/C++, with a particular influence on Python
• you will be qualified to degree level with experience in scientific software development, using a modern high-level language, and with an understanding of good software design principles and design for usability
• we routinely present new developments at international conferences and publish in scientific journals, and the role offers the opportunity for some international travel

Requirements

• object-oriented programming using a higher-level programming language
• data management, describing data and exploiting databases for scientific work
• synchrotron experimentation and data interpretation in each scientific field
  Show more +8
• working with large and complex code bases
• structural biology or a related area and development of scientific software
• image processing algorithms and techniques, particularly in the context of cryoEM
• APIs, RESTful services
• developing software solutions that are robust and performant
• handling and analysing large volumes of scientific data sets using parallel computing
• software development in a modern programming language such as Python, C++ and/or Java
• python 3, C/C++ and EM image formats

Trade

• mathematics
• Mathematics

Earnings for position data scientist

Responsibility

• developing skills in / using electrical CAD software and AutoCAD to produce schematics, hook-ups, and other electrical design documentation
• developing and applying expertise in technologies such as programmable logic controllers, motion controls, distributed I/O, instrumentation and pneumatic controls
• assisting in procurement of equipment through commercial suppliers; using established procurement procedures the obtain quotes and raise purchases orders
  Show more +18
• assisting in / carrying out procurement of equipment through commercial suppliers
• use of electrical CAD software and AutoCAD to produce schematics, hook-ups and other electrical design documentation
• contributing to risk assessment exercises, by maintaining an awareness of activities and reporting on potential issues
• maintaining and updating engineering drawings and documentation on projects
• producing high quality detailed electrical drawings from customers specifications
• developing your awareness of relevant British, European International and company standards and understand the implications on design
• developing and applying expertise in technologies such as programmable logic controllers, motion controls, distributed I/O, instrumentation, and pneumatic controls
• as the Electrical Design Engineer you will additionally be responsible for
• producing high quality detailed electrical drawings
• developing the skills required, in the production of electrical system designs for a variety of projects including, precision positioning controls for optical systems, vacuum control systems, machinery controls, safety circuits and LV systems
• assisting / producing electrical system designs for a variety of projects including, precision positioning controls for optical systems, vacuum control systems, machinery controls, safety circuits and LV systems
• working with internal and external scientific and engineering colleagues to produce electrical systems designs for a variety of projects including precision positioning controls for optical systems, vacuum control systems, machinery controls, safety circuits and LV systems
• contributing to design reviews and system verification and validation
• developing the knowledge and skills required to use electrical CAD software and AutoCAD to produce schematics, hook-ups, and other electrical design documentation, in support of the project requirements
• about You
• suitable candidates will have a degree in an Engineering Discipline with an electrical bias
• suitable candidates should be qualified to at least HND level or equivalent in Electrical Engineering or a similar relevant discipline, with degree level qualifications desirable
• we are seeking an Electrical Engineer, with experience in the design, manufacture, assembly, testing and commissioning of electrical systems working within a QA environment, who also has an understanding of electrical designs for control and automation systems and, with good working knowledge of AutoCAD and an electrical CAD system

Requirements

• ability to produce designs and specifications to appropriate standards, e.g. electrical diagrams, parts lists and schedules
• ability to produce designs and specifications to appropriate standards, e.g., electrical diagrams, parts lists, and schedules
• good understanding of Electrical engineering fundamentals
  Show more +4
• grasp of essential health and safety context for all work
• regulatory / safety awareness
• basic electrical safety awareness
• you will also demonstrate understanding of control systems and electrical designs, with good working knowledge of AutoCAD system

Earnings for position electrical design engineer